Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WGF350ESE > Parts

WGF350ESE Westinghouse Range - Parts

All parts for the Westinghouse Range WGF350ESE

Below is a list of all parts for the Westinghouse Range WGF350ESE - White. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the WGF350ESE
1-14 of 121
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$27.54

Natural Gas to Liquid Propane Conversion Kit

This kit is used to convert your appliance to liquid propane.

$107.93

Bake Igniter

This is a bake igniter manufactured for an oven, stove, or range burner. It ignites the gas to light the oven burner to bake your food items. If your oven will not heat properly, your igniter could be faulty and you may need to replace it. You can access your bake igniter by removing the bottom panel and burner shield of your oven. Be sure to disconnect power to your appliance before completing this repair because you will be working closely with wiring harnesses. This part is sold separately and is a genuine replacement part sourced from the original manufacturer.

$8.68

Rear Drawer Glide

This rear drawer glide, also known as a storage drawer glide, is used in ranges. This helps hold the front side of the storage drawer and allows the drawer to easily slide in and o...

$8.68

Front Drawer Glide

The front storage drawer glide on your range is mounted on the side of the cabinet. The purpose of the drawer glide is to support the storage drawer from the front. If your front storage drawer glide is damaged or missing, or your storage drawer does not close properly, you should consider replacing the drawer glide. This product is sold individually. This part is approximately 2 inches in length, and 1 inch in width. The front drawer glide is made of white plastic. Many of our customers have rated this repair as easy. The storage drawer also uses a rear drawer glide, which you can find by searching part 977753.

$8.21

Anti-Tip Kit

The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, ...

$11.57

Medium Burner - 9.5K

The surface burner head is used for ranges and ovens, and is located on the cooktop, where the flames go up. The surface burner spreads the gas through holes to create an even flame throughout the entire cooking area. If your surface burner is damaged it can affect the distribution of gas, or the flames may not come up correctly. If this is the case, replace this part. The measurements of the surface burner are: 6.25 inches in length, 5.13 inches in width, 8 inches in height, and 0.4 pounds in weight. Allow your cooktop to cool before installing this part. Refer to the manual provided by the manufacturer for further repair instructions.

$6.59

Igniter/Orifice Mounting Screw

$5.11

Steel Washer

This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter. This washer is an OEM part, made of steel, which is sourced directly from the manufacturer. This specific steel washer is used with your range, to secure the inner and outer door together and to secure the oven door handle back in place. Users have ranked this repair as a simple installation that should take you less than fifteen minutes to complete.

$41.18

Front Burner Igniter/Orifice Assembly

$15.87

Medium Burner Cap - Black - 9.5k

$52.93

Metal Rack

$32.99

Door Handle

Screws are not included.

$8.76

Foot Leveling Leg

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

$55.67

Oven Door Cap - White

This part goes over the top of the oven door glass. The door handle also attaches to the door cap.

All Parts for the WGF350ESE
1-14 of 121