Models > WGF325BADD > Instructions

WGF325BADD Frigidaire Range - Instructions

All Instructions for the WGF325BADD
256 - 258 of 258
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Igniter not drawing enough volts to open safety valve.
Removed the oven drip pan and removed the old igniter and cut wires and used the supplied wire nuts and replaced the old part turned the oven on and it ignited.
Parts Used:
Flat Style Oven Igniter
  • Christopher from Oakmont, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken inner glass panel in oven
Bought a electric range/oven with a broken glass in the door cheaply because the owner didn't think they could fix the glass. I watched the video on You Tube on how to handle the spring loaded hinges and followed the steps as presented. The toughest part of the job was cleaning all the crud on all of the glass due to the gap in the inner glass. I had to use a square drive and a phillips head screwdriver to disassemble and reassemble the door. It took less than 30 minutes to complete the job and most of that time was cleaning the glass.
Parts Used:
Inner Oven Door Glass Panel
  • GARY from LIBERTY, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Burner would not light because of cracked ceramic collar
The electrode was sparking to ground through the cracked ceramic rather than within the ignition zone. I used spray electronic contact cleaner to free rusted screws (different metals often contract at different rates and separate under the very cold spray). Replacing the electrode was a simple substitution. Also sprayed the spade terminal pair to remove any corrosion. Worked first time.
Parts Used:
Surface Burner Igniter Electrode
  • Anthony from Phoenix, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WGF325BADD
256 - 258 of 258