Models > WGD9500TW4 > Parts

WGD9500TW4 Whirlpool Dryer - Parts

All parts for the Whirlpool Dryer WGD9500TW4

Below is a list of all parts for the Whirlpool Dryer WGD9500TW4 - Residential, Gas. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the WGD9500TW4
1-14 of 175
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Thermal Fuse

This part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when continuity between the pins...


Door Catch Kit

This kit contains two door strikes, and various door catches to service dryer doors that have one or two catches.


Idler Pulley with Tri-Ring and Gasket

A dryer's idler pulley helps the belt to rotate the drum. Also known as dryer belt tension pulley wheel.


Lint Filter

This filter collects lint as it passes through the dryer vent.


Igniter Kit

This silicone carbide igniter with ceramic holder kit includes the 3" flat igniter, bracket, 5" wire leads, and the plug. Able to replace both round and flat igniters, this kit is ...


Dryer Repair Kit

This kit comes with one multi rib belt, four drum support rollers, one idler assembly, nine tri rings and one washer.


Internal-Bias Thermistor

Part may differ in appearance, but functions the same as original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.


Radiant Flame Sensor

This part senses the flame for heat allowing the gas valve to open.


Drum Support Roller

Sold Individually. Most dryers require 2. Tri-rings sold separately.


Leveling Foot

Sold individually.


Tri Ring

Sold individually.


Light Bulb - 10W

This 10 watt light bulb is used with both washers and dryers. Sold individually.


Idler Pulley Bracket with Wheel


Moisture Sensor

All Parts for the WGD9500TW4
1-14 of 175