Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
If your element will not heat, there could be an issue with your drip bowl. This chrome drip bowl is 8 inches in diameter, and fits most electric ranges. Before you replace the drip bowl, make sure th...
This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the followi...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This switch controls the stovetop surface burner.
This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much hea...
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set ...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randy
May 25, 2023
All 4pf the burner as well as the oven will not heat up. The red cooktop light does come on and I have checked both the cord and fuse and both are OK
For model number WFC150M0EW3
Hi Randy, thank you for reaching out. Based on the description that you have provided, we would recommend checking the terminal block, part number PS11750972, to fix this issue. We hope this solves your issue!
Neither the broiler element or the baking (oven) element get hot. They become warm to the touch but not too hot to hold. Could it be the temperature sensor? The range is working fine.
For model number WFC150M0EW3
Hello Blair, thank you for the question. Based on the description that you have provided, we would recommend checking the temperature sensor, part number PS11749737, to solve the problem. Glad to be of assistance!
I have little or no heat in either the baking or broiler modes. Elements are slightly warm to the touch but not too warm to hold. I checked the temperature sensor as you instructed - 1084 ohms so it doesn’t appear to be the problem? Next on your list of potential culprits is the safety thermostat. Can I check it with a multimeter?
For model number WFC150M0EW3
Hello Blair, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the control board, part number PS12114372, to solve the problem. We hope this helps!
The Bake element is warm to touch when set to bake. The broiler element seems to work fine. I have unplugged the stove and plugged back in, and the bake element will get hot and work like it's supposed to and then when we use again the bake element is warm to touch and not working correctly again. I am stumped and wondering if you could give me a little advice if it's in the temp probe or if I have control board issue.
Thank you
For model number WFC150M0EW3
Hi Byron, thank you for reaching out. Based on the description you have provided, the issue could be with the bake element, part number PS12348633. You may need to replace it to fix the issue. We hope this solves your problem!
Unplugged burners. . . . . Removed old bowls and replaced with new. . . . . . Plugged burners back in. However, I do want you to know that I could not believe the promptness of your service and the courteous customer service person that assisted me with my problem in selecting the correct drip bowls. You are definitely a unique compan
... Read morey!!!!
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays s
... Read moreteady but when I turn it to 400 it slowly goes up to 425 degrees.