Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the Westinghouse Dryer WEQ332HS0 - Electric. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant and installation screws.
This 87-3/4" long dryer drum belt goes around the dryer drum and the pulley to rotate the drum once motor is activated.
This dryer heating and housing assembly has terminals at four o'clock. This E-line assembly comes with a felt strip and insulators already attached.
Appliance requires 2 .Sold individually.
This part attaches onto the inside of the rear panel of the cabinet.
This knob accepts a D-shaped shaft. Sold individually.
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 ...
This knob accepts a D-shaped shaft.
This part is used to start the dryer once you have selected a setting on the timer.
This part helps keep the door closed while the machine is running.
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops by 70 degrees Fahrenheit.
"Male" piece of a dryer door closing mechanism.
This white dryer lint filter screen collects lint as it passes through the dryer vent.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.