WEF361ESA Westinghouse Range - Instructions

This was an easy repair. I was going to call my appliance guy when I read how easy it was to replace on this site I decided to try it myself instead. It was that easy. I removed the old element and installed the new one in under 15 minutes. The video showed how easy it was that I had to try it myself and I am glad I did. I saved a bunch.

First, I looked on you tube for a quick video on how to do the job. Next, I removed the old element by simply removing the two screws. Be careful not to let the wires fall back through the holes. Next, just plug in the new element and put the screws back. Simple! Last time the element broke I paid a repairman $185!!!!!! With shipping this time it cost me about $40!

Per your printed instructions - easy to read and follow

Checked the burner and no power to heat the burner. removed the old switch and put on the new one.

Replaced control units that were malfunctioning.

My husband fixed it in about 30 minutes or less. He said it was a piece of cake!

It was so easy. We pulled the stove away from the wall and unplugged it. My husband used a nutdriver to unscrew the two screws holding the element in place. He unplugged the wires from it when he pulled it out. He plugged the wires to the new element, screwed it back in place and voila! I was ready to bake. So very easy.

nothing to it

watched the veido first then un pluged the stove then i took out 6 screws and 2 from the switch and reversed every thing

Undid two screws; removed old element; inserted new element and placed the bracket and two screws to hold in place.

I watched the video--that was very, very helpful. My son helped me, but I think I might have been able to handle it without him after watching the video. Also, your price was far less than half of what another website quoted for the same heating element.

Removed oven from wall, disconnect power source, loosen nuts from element, pull element out, disconnect wires, hook up wires to new element, put back nuts.Plug in and it worked great.

Simple just remember there is a hinge lock on the hinge just open the door reach down to hinge and lift lock it blends in but its there close the door and pull out the door pull 2 screws on the hinge connecting it to door install new hinge

Disconnected power; unscrewed element from oven wall; pulled element off of contacts. Pushed new element onto contacts; screwed to oven wall

After in I found my oven glowing from the small fire inside, I thought I was in for an expensive repair or complete replacement. Part select helped me find the exact part I needed and the video showed me just how easy it would be. $40 and 15 min later my oven was fixed and I was baking again! The repair consisted of removing two screws and simply removing and plugging in the new bake element. Thanks for the help!!