WEF360ESC Westinghouse Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
bake element caught fire and needed to be replaced
first pulled the breaker, then removed the oven door. One wire came out easily but the other side would not budge so we had to take off the back of the range. They had cought the wire up in a loop and so it had no give. Removed it from the loop so if it ever needs to be replaced again we won't have the same problem. Used the advice from other comments and it went as discribed. I hope others also removed the door as I can't imagine how much harder it would be with the door in place.
Parts Used:
-
Betty from Midland, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Oven quit on Thanksgiving Day
Real easy to replace the heating element. Two screws and out came the old and in with the new one.
Parts Used:
-
Michael from Herington, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
heating eliment had broken into
I had the part shipped directly to the rental house and the tenant installed it with no problem.
Parts Used:
-
ALICE from NOBLESVILLE, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
lower burner burnt in two!
after reading the very first reader report, I was happily amazed how easy the repair was. it took longer to unwrap the part than it did to undo two small nuts, unclip the wire, clip on the replacement burner, and redo both nuts. thanks again for the help. saved lots of time and money.
Parts Used:
-
Lynne from Woodland Park, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Electric Connector to mounting bracket too long
I had to remove the back of the range in order to cut away the sheet metal that was contacted by the bent terminals that had to be done to shorten them to clear the back sheet metal panel.
Parts Used:
-
B A from Wolfeboro, NH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
oven element burnt in two pieces
Just followed the repair video provided...nothing to it!!! Very impress with the next day service and easy to follow video instruction..
Parts Used:
-
vicki from pomeroy, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Easy Peasy
Oven went out on Christmas Eve . . . yikes! Managed to get through the holiday by using my roaster and my husband was planning to call a repairman the day after Christmas. I told him to wait until I could do some research. I got on line, found this site and decided I could do it myself. I ordered the element on Thursday, received it on Friday. Great service! It took about 10 minutes to install, by following the video. (Took longer to find the right electric breaker than it did to change the element!)
Parts Used:
-
Marolyn from Potosi, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
I had placed aluminum foil on bottom and it adhered to the surface.
I removed two screws and lifted out the ruined bottom. I set the new bottom in, but could not get the screws lined up so left them out. The bottom is heavy enough, it is not going anywhere. I am very grateful the part was available.
Parts Used:
-
Marilyn from Logansport, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!