WEF350ESB Westinghouse Range - Instructions

Removed 2 back screws, lifted pan from rear and pushed front slightly forward/into oven until front lip cleared. Installed new pan in reverse order.

I removed two screws from inside the oven and pulled out the broken element and replaced with new one in just a few minutes,it was so simple!

After removing an oven rack to make room for the thanksgiving turkey roaster, I have NO IDEA, where I might have stowed it away! After searching every cabinet and every closet I realized I needed to do something quick for our annual christmas cookie marathon that would begin on Sunday. It was so easy to order the part, it arrived the next day, and we baked for 5 hours using the 3 racks in the convection oven. Dozens of cookies later... Thank you Parts Select!

Talked to someone who knows , DX'd the potential problem,looked for the part on your very user friendly website and your DX was exactly what my oven was doing, when the Thermo-Sensor arrived, I unplugged the oven, removed the metal back, took out the faulty Sensor, replaced it very easy then realized the plug was different, so called a friend who knows how to Solder and 2 hrs, later, my oven was repaired and I began baking an Apple pie to repay a friends kindness The pie was perfectly baked , my friend was happy and so am I ,the baker, just before the holidays Thank you Parts Select for helpful DX and speedy delivery - seems you saved Christmas for me.

Removed two screws , unplugged old element , plugged in new element , installed the two screws and the oven was back in business . I did cut the power to range/oven before starting .

unplug bad element,plugin the new one

It was the holiday season and all through the house, cries of "what's wrong with the oven?" were heard from my spouse. "I know you can fix it!" she said, trying to flatter, so I logged on to Partselect.com to see what was the matter. I found what I needed and ordered with a click, and to my surprise my part arrived quick. I unplugged the oven, thinking "safety first" and bent down to inspect it, expecting the worst. With flashlight, wrench and pliers and still feeling queasy, I was surprised to find out that it was really quite easy. The two screws in the flanges came out with a twist and the terminal slid off, no need for a fist. With the new element in place and the terminals on, the screws were replaced and the repair was all done. “You really DID fix it” she said with a look, “Now get out of my way, I gotta cook!”

I watched the video that was furnished online and did what they said. . . . . I do alot of do-it-yourself project. . . . Because of my income input. . . So this probably saved me a lot of repair man expense. . . . Linda

I read other experiences on line and determined that it was either the element of the control switch. So I decided to order the control. When deciding I had removed the upper back sheild and put it back on. Subsequently a couple of days later there were popping noises culminating in a flash and the stove went 'dark'. I figured that I had pinched a wire when I put the upper shield back on. I removed the shield and looked for black 'short' marks. None were visible. I went to the electric panel and tried to reset the 60 amp breaker. It wouldn't reset and momentarily the lights dimmed. Uh-oh! Went back to stove and opened area where the cord connects to the stove. Direct short- a lose terminal block bolt had welded itself to the chassis! I redid all connections and lined inside of stove back with duct tape- also redid the connections with bolts, nuts and lockwashers covered each with electrical tape. Now reconnecting electric I put the new switch in. Removed the knob from the front and started to transfer the wires from the back. This was a little confusing because the control I received looked different from the one in the stove. After some checking I looked closely at the terminals on each control and they had tiny number/letters on them like H1, Li, H2 etc. So I just transferred H1 0n one cntrol switch to H1 on the new switch- L1 to L1 and so on. Put it all back together, turned on power and everything is working great.

Before doing the repair I watched the video provided by Parts Select! Great idea and extremely helpful the way your technician walked through all the details. Went in "smooth as silk". Thanks to Parts Select, all is well and the wife is baking me a cake!

The instructions were all we needed. My wife did the repair and I held the flashlight since I just had surgery. Everything went just fine.

Removed the screws that held the element in. I didn't have the proper tool, so I used an adjustable wrench. Pulled the element out until the wires were exposed. Pulled the connectors off the old element, put them on the new one, reinserted the wires, and put the screws back in. Easy!

We noticed a small hole in the heater element. My fiance did some research and found your website. He ordered the part for less than $25. Shipping service was very fast. We had the part within 2 days. He had it installed in less than 10 minutes. Thanks! for the great service. We were able to use the oven for everything we needed to bake for New Year. Excellent service.

Took the old one out and put the new one in.

orderd part and saw the video and it was very ease to replace part