WDSR2080DCCC General Electric Washer - Parts

Compression Ring

★★★★★

★★★★★

(1)

Used in conjunction with the timer dial knob assembly. Add to cart

Lid Switch with Wire Harness

★★★★★

★★★★★

(18)

This lid switch with wire harnesses is used in washing machines. The pin on the lid switch pushes onto the lever of the switch to communicate to the machine that the washer lid is closed. If your wash... Add to cart

Pump to Tub Inlet Drain Hose

★★★★★

★★★★★

(8)

This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide. Add to cart

Water Level Pressure Switch

★★★★★

★★★★★

(6)

This switch keeps your washer from overflowing. It is responsible for shutting off the power to the fill valve and redirects the power to the timer to start the washing machine running once the corre... Add to cart

Temperature Switch - 3 Position

★★★★★

★★★★★

(16)

Also known as a Rotary Switch. This part regulates the temperature of the water in the tub. Add to cart

Socket Rod Support - White

★★★★★

★★★★★

(1)

This part is a replacement socket rod support for your washer. The socket rod support is found at the top of the washer frame in the front part of the washer. It supports the suspension rod, so the ro... Add to cart

Inner Tub Base Hub

★★★★★

★★★★★

(5)

This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, a... Add to cart

Screw - Black This screw is sold individually. Add to cart

Agitator

★★★★★

★★★★★

(1)

This part does not include the agitator cap. Must order separately. Add to cart

Water Fill Nozzle

★★★★★

★★★★★

(6)

This part is the replacement water fill nozzle for your washer. It is white and tan in color, made of plastic, and is approximately 7 inches long and 4 inches wide. The water fill nozzle is also known... Add to cart

Belt Installation Tool

★★★★★

★★★★★

(3)

This part is the replacement belt install tool for your dryer. It comes with two round plastic halves of the tool that are held together with an o-ring (also included). To use the tool, position the t... Add to cart

Shaft and Mode Shifter Assembly Also known as the gearcase or transmission. This part helps move the agitator back and forth during the wash cycle. New shifter mounting holes are NOT threaded, use original self tapping screws to in... Add to cart