Models > WA476DSHAWR

WA476DSHAWR Samsung Washer - Overview

Models starting with WA476DSHAWR

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Drain Pump Assembly – Part Number: DC31-00054A
Drain Pump Assembly
★★★★★
★★★★★
(17)
PartSelect #: PS4204638
Manufacturer #: DC31-00054A
This is a 120 volt, 60 hertz drain pump assembly for a washing machine. It is a genuine OEM part. This pump helps expel water from the washing machine, and is activated after the spin speed is maintai...
$163.07
  In Stock
Affresh Washing Machine Cleaner - 3 pack – Part Number: W10135699
Affresh Washing Machine Cleaner - 3 pack
★★★★★
★★★★★
(2)
PartSelect #: PS1960673
Manufacturer #: W10135699
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
$12.62
  In Stock
Adjustable Leveling Leg/Foot – Part Number: DC61-01722B
Adjustable Leveling Leg/Foot
★★★★★
★★★★★
(1)
PartSelect #: PS4206427
Manufacturer #: DC61-01722B
This adjustable leg, also known as a levelling leg, is a genuine OEM part supplied by Samsung for use with washing machines. The leg supports the washing machine by ensuring that it is level and balan...
$15.47
  In Stock
Lid Switch Magnet – Part Number: DC61-03184A
Lid Switch Magnet
PartSelect #: PS4206980
Manufacturer #: DC61-03184A
$32.27
  In Stock
Pulsator Cap – Part Number: DC66-00680A
Pulsator Cap
★★★★★
★★★★★
(2)
PartSelect #: PS4212268
Manufacturer #: DC66-00680A
$37.07
  In Stock
Call (800) Samsung – Part Number: CALL_1-800-SAMSUNG
Call (800) Samsung
PartSelect #: PS17019800
Manufacturer #: CALL_1-800-SAMSUNG
  No Longer Available
Tapping Screw – Part Number: 6002-000520
Tapping Screw
PartSelect #: PS4133205
Manufacturer #: 6002-000520
$4.67
  In Stock
Water-Level Pressure Switch – Part Number: DC96-01703C
Water-Level Pressure Switch
PartSelect #: PS4217081
Manufacturer #: DC96-01703C
$77.87
  In Stock
Pulsator Bolt – Part Number: DC60-40133A
Pulsator Bolt
★★★★★
★★★★★
(1)
PartSelect #: PS4205362
Manufacturer #: DC60-40133A
$16.67
  In Stock
Control Knob - Silver – Part Number: DC97-16931B
Control Knob - Silver
★★★★★
★★★★★
(1)
PartSelect #: PS4221991
Manufacturer #: DC97-16931B
This selector knob, also called the control knob, is used to choose different settings and cycles on your dryer. This knob is silver in color and is found on the control panel. If it becomes damaged, ...
$55.07
  In Stock
Door Lock Switch – Part Number: DC34-00025E
Door Lock Switch
PartSelect #: PS12072637
Manufacturer #: DC34-00025E
$159.47
  In Stock
Drain Cap – Part Number: DC61-10673A
Drain Cap
PartSelect #: PS4207510
Manufacturer #: DC61-10673A
This drain cap is a genuine replacement part made for Samsung washers. It is a small plastic cap, approximately 1.5 inches long, that fits onto the end of the washing machine drain hose. The cap is re...
$4.67
  In Stock
View More
Back to Top

Common Symptoms of models starting with WA476DSHAWR

[Viewing 1 of 1]
Will not drain
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Drain Pump Assembly

Replacing the Drain Pump Assembly

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Code indicating washer was NOT discharging water
Watched the video, procedure was simple and as depicted on the video. Started by using a wet shop Vac to the discharge hose and sucked as much dirty wash water out as possible. Removed the pump,and found the motor did not turn freely. Removed the motor (3 screws) and replaced the motor with new part. Reassembled the washer, everything worked as it should. After about 3-4 loads of laundry, the "Not Draining" code / problem returned. Again, sucked out the water with the Shop Vac. Checked the Filter /Cleanout and found it completely packed with MUD. Cleaned that out, and again disassembled the washer. The pump was removed and the remaining muddy gunk was cleaned from the impeller. The 3 drain lines that attached to the pump were inspected for blockage/obstruction and flushed of any muddy residue. Reassembly was quick and easy, and the washer has worked well since. I have no idea how the dirt got into the system with enough dirt to gunk up the system. Recommend keeping more frequent inspections of the cleanout trap.
Read less
Parts Used:
Drain Pump Assembly
  • SCOTT from VERNAL, UT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The nut (referred to as spin nut or hexagon nut) which holds the tub to the motor broke into multiple pieces.
NOTE: this repair requires OEM part number DC60-50003A and what was originally provided was 6021-001573. This is important as Part Select has this mixed in their Database and I made them aware.

Otherwise once you have the correct part the repair is simple. Open the top of the washer and remove the pulsator cap, there is a 10mm bolt which is removed next, the pulsator pan (believe this is correct) can be removed with a flat head screw driver. Do so by placing the screw driver in one of the groves by where the bolt was. Once this is removed that is where this part will be. I didn’t have to remove since mine was in pieces but it comes off/goes on counter clockwise. Repeat steps to put everything back together.
Read less
Parts Used:
Pulsator Bolt
  • Josh from UNION, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top