Models > WA422PRHDWR/AA-0001 > Instructions

WA422PRHDWR/AA-0001 Samsung Washer - Instructions

All Instructions for the WA422PRHDWR/AA-0001
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washer stopping in the rinse and spin cycle
Tipped the washer up on a couple of chairs. Pulled the motor apart in three pieces and replaced the Hall Sensor. Error code lead me right to the problem and solution.
Parts Used:
Motor hall sensor
  • Gary from CENTER HARBOR, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain hose was cracked and leaking.
Squeezed clamp with fingers to remove old drain hose. Put clamp on new replacement hose and slid over drain pipe and released clamp. Less than a minute. Hose was exact replacement part.
Parts Used:
Assembly HOSE(O);HUDSON WASH
  • Richard from HERNANDO, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WA422PRHDWR/AA-0001
1 - 2 of 2
Back to Top