Models > VLSR1090G2WW > Parts

VLSR1090G2WW Hotpoint Washer - Parts

All parts for the Hotpoint Washer VLSR1090G2WW

Below is a list of all parts for the Hotpoint Washer VLSR1090G2WW - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the VLSR1090G2WW
1-14 of 114
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Tub Dampening Strap

Appliance would take 4 straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet. Sold individually.


Tub Seal

The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft. This seal is difficult to replace and should probably be installed by a qualified technician.


Timer Knob Clip


Drain Hose - 4 1/2' Long


Drain Pump and Motor Assembly

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.


V-Style Drive Belt


Drain Hose Clip

This clip holds the drain hose to the back of the washer.


Split Ring

This split ring is two inches in diameter.


Tub Bearing


Agitator Coupling

Bolt not included. This part connects the transmission drive shaft to the agitator base.


Hub Nut


Knob and Clip

This knob accepts a D-shaped shaft.


Compression Ring

Used in conjunction with the timer dial knob assembly.


Tub Bearing

All Parts for the VLSR1090G2WW
1-14 of 114