Quick Question!

Have you ever purchased from PartSelect.com before?

Models > VLLR1020T1WO > Parts

VLLR1020T1WO Hotpoint Washer - Parts

All parts for the Hotpoint Washer VLLR1020T1WO

Below is a list of all parts for the Hotpoint Washer VLLR1020T1WO - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the VLLR1020T1WO
1-14 of 85
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Tub Dampening Strap

Appliance would take 4 straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet. Sold individually.


Agitator Coupling Kit

Washing machine agitator drive bell with bolt. It connects the transmission drive shaft to the agitator base. *NOTE: Hold down bolt not sold separately.


Tub Seal

The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft. This seal is difficult to replace ...


Drain Hose Clip

This clip holds the drain hose to the back of the washer.


Split Ring

This split ring is two inches in diameter.


Hub Nut


Hub Washer


Retaining Clip for Clutch

This retaining clip is a spring clip that should be replaced each time it is removed from the clutch assembly.


Tub Dampening Strap Retainer


Inner Tub Base Hub


Compression Ring

This compression ring works in conjunction with the timer dial.


Timer Knob with Clip


Lid Bumper

This bumper is sold individually. The bumper is located under the washer lid.


Hose Clamp Kit

This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.

All Parts for the VLLR1020T1WO
1-14 of 85