Models > VBXR1090DDCC > Parts

VBXR1090DDCC Hotpoint Washer - Parts

All parts for the Hotpoint Washer VBXR1090DDCC

Below is a list of all parts for the Hotpoint Washer VBXR1090DDCC - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the VBXR1090DDCC
1-14 of 120
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Tub Dampening Strap

Appliance would take 4 straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet. Sold individually.


D-Shaped Knob Insert Clip

Sold individually.


Tub Seal

The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft. This seal is difficult to replace ...


Timer Knob Clip


Drain Hose - 4 1/2' Long


Drain Pump and Motor Assembly

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.


V-Style Drive Belt


Drain Hose Clip

This clip holds the drain hose to the back of the washer.


Split Ring

This split ring is two inches in diameter.


Dual Water Inlet Valve

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.


Tub Bearing


Agitator Coupling

Bolt not included. This part connects the transmission drive shaft to the agitator base.


Hub Nut


Compression Ring

Used in conjunction with the timer dial knob assembly.

All Parts for the VBXR1090DDCC
1-14 of 120