Models > VBXR1060T4WB > Parts

VBXR1060T4WB Hotpoint Washer - Parts

All parts for the Hotpoint Washer VBXR1060T4WB

Below is a list of all parts for the Hotpoint Washer VBXR1060T4WB - Residential WASHER. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the VBXR1060T4WB
1-14 of 123
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.71

Tub Dampening Strap

Appliance would take 4 straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet. Sold individually.

$3.62

D-Shaped Knob Insert Clip

Sold individually.

$5.93

Agitator Coupling Kit

Washing machine agitator drive bell with bolt. It connects the transmission drive shaft to the agitator base. *NOTE: Hold down bolt not sold separately.

$9.75

Drain Hose Extension - 4 1/2' Long

$3.27

Timer Knob Clip

$40.51

Dual Water Inlet Valve

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

$5.54

V-Style Drive Belt

$3.00

Drain Hose Clip

This clip holds the drain hose to the back of the washer.

$7.23

Tub Seal

The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft. This seal is difficult to replace ...

$53.39

Drain Pump and Motor Assembly

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.

$3.00

Tub Bearing

$7.45

Hub Nut

$30.95

Water Level Pressure Switch

This switch keeps your washer from overflowing. It is responsible for shutting off the power to the fill valve and redirects the power to the timer to start the washing machine ru...

$3.14

Hub Washer

All Parts for the VBXR1060T4WB
1-14 of 123