Quick Question!

Have you ever purchased from PartSelect.com before?

Models > TWX233RBD1 > Parts

TWX233RBD1 Tappan Washer - Parts

All parts for the Tappan Washer TWX233RBD1

Below is a list of all parts for the Tappan Washer TWX233RBD1 - Residential, 27". To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the TWX233RBD1
29-42 of 132
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.44

Idler Pulley C-Clip

$75.00

TRUNNION

This part helps with the spinning and agitating cycles.

$12.97

Trunnion Plate

Locking Plate.

$9.74

BOLT

Holds plated on Trunion .312-18 x 1.625.

$6.59

SCREW

$4.09

GROMMET

$0.93

Tub Bearing Screw

Washer Lid Lock with External Safety Switch

Mounting bracket on this part replaces old style ( You may need to drill off old bracket before mounting new lock).

$27.86

STUD

Direct Drive Pump

This pump sucks the water out of your washers tub with one of its valves, and drains the water into a drain hose with the other valve.

$8.63

Clip

This clip is less than an inch long.

Pump Slinger

This part is found between the pump and the motor shield and its purpose is to make sure that nothing leaks down the shaft into the transmission. Replace if washer is leaking.

$18.11

CLIP

$25.72

Upper Lip Seal

This basket drive tube seal or upper lip seal is used for a top washer and is located on top of the transmission, below the agitator drive block. The tube seal functions as a protective tool to prevent water from leaking into the drive tube. The measurements for this seal are: 4 inches in length, 1 inch in height, and 0.01 lbs in weight. Remember to unplug your washer from the power source before beginning this installation, as a safety precaution. For installation instructions and accurate guidance, refer to the manual provided by the manufacturer.

All Parts for the TWX233RBD1
29-42 of 132