Models > TEF361ESA > Instructions

TEF361ESA Tappan Range - Instructions

All installation instructions for TEF361ESA parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TEF361ESA
286-300 of 465
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bake element stopped working after 17 years

  • Customer: Michael from Lockport NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Unscrewed the two screws which held element in place...pulled straight out...gently pulled connector terminals off....replaced with new element connecting element terminals ...sliding element back into place (make sure terminal connection is straight (ie NOT BENT) when pushing element back into original position)and screwing screws back in...DONE!!! EASY PEASY!!!

bake element burnt into

  • Customer: JEFFREY from HIGHPOINT NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
removed the screw at the mount on each side of element .pulled old element straight out untill wire connector was out at the back of oven ..unplugged wire connector from each end of old element ..plugged wire connectors back into new element .pushed element plugs back into back of oven and installed each screw that holds element into place.. real simple

Large burner switch made popping and buzzing noises.

  • Customer: Glenda from Miles City MT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
The video was a great help. I could have replaced the switch without watching it, but it gave me confidence that I was doing it right. Everything went just like he said it would. Burner seems to work better now and no more scary noises.

the bakely element was burned into in two different places

  • Customer: jannetta from clarkton MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
aftering watching your repair video the repair went very well we took the oven door off to make access easier. the worst part of the repair was getting the door back on.

Oven would not heat to temperature

  • Customer: Robert from Lorena TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
Undo the two nut screws pulled out the element and replaced it with the new one.

Element burned out; needed replacement

  • Customer: Michael from Spicer MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Followed instructions on YouTube and Frgidaire website. It looked easy; was easier than it looked -)

old glass shattered when no one was around.

  • Customer: William from Ash Grove MO
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the oven door, the trim was already cleaned and ready for new glass. Once the new part arrived, I removed it from the shipping container, placed it in the bottom groove of the trim kit and tightened the screws. Then placed the top trim and handle assembly, in place and tightened the screws. Then placed the oven door back on stove.

Bottom oven element no longer working.

  • Customer: Frances from Garner NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Socket set
  • 0 of 0 people found this instruction helpful
Removed old element by taking out two screws at bottom rear of oven. Pulled element and wires forward from two holes and unclipped from wires. Clipped new element to wires and pushed the wires back into the holes. Then replaced the two screws. Needed flashlight so that 60+ eyes could see the screws and holes in the oven. A quick and inexpensive repair. Element was delivered very quickly.

explosion in the oven.

  • Customer: Adam from palmyra VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
took the two nuts off the back wall of the stove and disconnected the push on terminals. ordered by model number. replaced and reinstalled the two nuts in stove. simple as possible

broken glass front

  • Customer: gregory from micco FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
replaced oven door glass

Hot Surface Light won't turn off.

  • Customer: Justin from Madison AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
Unplugged stove. Quickly unscrewed back panel (4 screws). Popped the wires off one at a time attaching them to the new switch. Pulled the knob off the front, unscrewed screws, and put new switch in repeating previous steps in reverse. Put the panel back on, plugged it up, and pushed it back into place. Done.

Bake element went out & Large Burner would not cut off

  • Customer: Gene from Ethel LA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
It was just a matter of loosing 2 screws on baking element & pulling 2 wires off & putting back on. On the Burner I had to take 6 to 8 screws off back 4 wires off & 2 screws on fron of switch. Very Easy!

broil element burn out

  • Customer: christopher from big pine key FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
take back planel off, take wires off old element and intsall new element hookup wires, put back planel ..under one hour job

eliment burnt out

  • Customer: Percy from Bryant Pond ME
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
took off back cover unhooked wires. pulled out screws in the oven and removed the element. put in new element replaced screws reattached the wires in the back replace the back cover. Done

No heat to large coil; erratic heat with clicking noise to small coil

  • Customer: Mustafa from Pennsville NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
I followed the Parts Select Video that showed replacing an identical switch. Mine were another brand & style with different color wires. I took a picture of 1 to keep track of the wiring and removed it. I saw that the terminals were marked P, H1, H2, L1, & L2 so I put the wire from the same terminal onto the Parts Select switches & they work just fine now. The parts I got from you are heavier and a much better quality than the original equipment. I would also like to say that I was amazed at how fast this order was shipped, and the washer pump was a piece of cake thanks to your video.
All Instructions for the TEF361ESA
286-300 of 465