Models > TEF351EWF > Instructions

TEF351EWF Tappan Range - Instructions

All installation instructions for TEF351EWF parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TEF351EWF
451-465 of 502
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace terminal block and burner unit.

  • Customer: James from Williamsville VT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Very simply following the online video instructions.

Lower heating element burnt out

  • Customer: Sandy from Marshall MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Super easy, was putting it back together when husband got home from work and decided that he needed to finish putting the last screw in

Heating element burnt out.

  • Customer: Andre from LaGrangeville NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Just like the video showed, I unscrewed the old element, and screwed in the new one. Really that easy!

Heating element burnt out.

  • Customer: Veronica from Port St Lucie FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Take off nut and cover at rear off oven, both sides. Pull old element off (push on plug). Put replacement element in oven push on to wire plug, make sure it is on tightly. Push into oven wall, secure by replacing nut and cover. Your Job is complete.

The oven element just went to pieces.

  • Customer: HAROLD from ASHLAND OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I pulled the stove out away from the wall and unplugged it from the wall. I then proceeded to take all the screw/nuts out and disconnected what was left of old element and put new element through holes in back and put on the connectors and reinstalled the back and plugged it in and turned on the oven and it worked like a dream. Thanks PartsSelect for the speed and effiency of getting me part to me.

my bake element broke

  • Customer: Patricia from Manchester CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I order the part from you which I got in 1 day great shipping. took out the part and rescrewed the part in done in 5 mins would order again from you and recommend to all

baking element was out

  • Customer: james from OCOEE FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
removed old baking element and replace new base baking element very very easy

shorted out small element burner switch

  • Customer: Alvie from Walnut Cove NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
First, I disconnected the electrical power by pulling apart the plug behind the range. Next, I removed the screws holding the service plate on back of the top panel.I removed the switch knob by gently pulling it from the stem. Underneath I found 2 screws holding the switch in the panel. I removed these with a phillips screwdriver.I was able to pull the entire switch out to the rear leaving all wires attached.The new switch looked different from the original and the wires were configured differently but the wires were clearly marked. By removing one at a time and placing it on the new switch to the corresponding marking,it was a simple matter to wire the switch.I reinstalled the switch in the panel,put back in the screws to hold the switch, slid the knob back on the stem, reinstalled the rear panel,and plugged the power cord back in.The switch worked perfectly.

Bake Element Did Not Heat.

  • Customer: Kendrick from Agawam MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Watched the video on Partselect before ordering the part, to see what I was getting into. Part arrived super quick. Removed bad element just as video described, and installed new element in opposite direction. Job was complete, and super was in the oven in less than 15 mins after arriving home from work. Anybody can do this repair, don't waste your money on a service call!

bake element caught fire and needed to be replaced

  • Customer: Betty from Midland TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
first pulled the breaker, then removed the oven door. One wire came out easily but the other side would not budge so we had to take off the back of the range. They had cought the wire up in a loop and so it had no give. Removed it from the loop so if it ever needs to be replaced again we won't have the same problem. Used the advice from other comments and it went as discribed. I hope others also removed the door as I can't imagine how much harder it would be with the door in place.

Oven quit on Thanksgiving Day

  • Customer: Michael from Herington KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Real easy to replace the heating element. Two screws and out came the old and in with the new one.

heating eliment had broken into

  • Customer: ALICE from NOBLESVILLE IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I had the part shipped directly to the rental house and the tenant installed it with no problem.

lower burner burnt in two!

  • Customer: Lynne from Woodland Park CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
after reading the very first reader report, I was happily amazed how easy the repair was. it took longer to unwrap the part than it did to undo two small nuts, unclip the wire, clip on the replacement burner, and redo both nuts. thanks again for the help. saved lots of time and money.

bake and broil elements not working

  • Customer: James from Crescent City FL
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
The bake element is easy to change. the broil element is fairly difficult. The best way I found is to tape the broil element to the roof of the oven, then install the supports. That ended up not being the problem. The problem was the timer. After changing that, which took only 10 minutes oven is working great.

Electric Connector to mounting bracket too long

  • Customer: B A from Wolfeboro NH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I had to remove the back of the range in order to cut away the sheet metal that was contacted by the bent terminals that had to be done to shorten them to clear the back sheet metal panel.
All Instructions for the TEF351EWF
451-465 of 502