All Installation Instructions for Tappan Range TEF351EWE

Switch was sparking

Took back cover off 2 screws held the switch then moved wires one at a time from old switch to the new one put everything back plugged in stove everything worked

Parts Used:

Infinite Burner Switch

Marshall from Newport,, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

the lower replaced

to install the element was somewhat easy but turn the oven on there is no heat either on the upper or replaced element the light on the range shows it workings so it no doubt has an internal problem that will require a electrician in order to locate the problem due to the noise that i heard when the element went out-i am not surprised that it needs other work

Parts Used:

Oven Bake Element

Madeline from Myrtle Beach, SC
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Burned out element

The DIY video on the PartSelect website was very useful as it showed how to do the repair without taking the panel off the whole back of the stove. It was a very simple repair being armed with the knowledge shown in the video.

Parts Used:

Oven Bake Element

David from Mountain rest, SC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Three terminal blocks burned out (disintegrated) on electric stove

First I want to thank Part Select for having the video online or I would not have attempted the repair. Also I saved over $75 on the parts!!!!!! It would have cost me $105 for parts and $125 for service tech to replace the burned off terminal blocks with new ones. Parts cost me $35 with shippiing, I did the repair saving me $195 !!!!!!!!! I replaced the parts as describied in the video and all is well. By the way, I got the parts in less than 24hours after ordering, cheaper than driving 30 miles to pick up overpriced parts !!!!

Parts Used:

Terminal Block Kit

Valentina from Riverside, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

burnt element

There was a video on here that give the simple instructions. Very easy

Parts Used:

Oven Bake Element

richard from Smithfield, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Heating element no longer worked.

Disconnect power cord, removed 2ea nut screws from inside the oven connecting heating element. Pull connectors thru the oven wall. Removed 1ea connector from each element connection. Replaced. Reinstall in reverse order.

Parts Used:

Oven Bake Element

jimmy from grand prairie, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Heating Element burned out

This was an easy repair. I was going to call my appliance guy when I read how easy it was to replace on this site I decided to try it myself instead. It was that easy. I removed the old element and installed the new one in under 15 minutes. The video showed how easy it was that I had to try it myself and I am glad I did. I saved a bunch.

Parts Used:

Oven Bake Element

Kristie from Nashua, NH
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Baking element split in half

First, I looked on you tube for a quick video on how to do the job. Next, I removed the old element by simply removing the two screws. Be careful not to let the wires fall back through the holes. Next, just plug in the new element and put the screws back. Simple! Last time the element broke I paid a repairman $185!!!!!! With shipping this time it cost me about $40!

Parts Used:

Oven Bake Element

Christine from Ellicott City, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Replacement of bake element

Per your printed instructions - easy to read and follow

Parts Used:

Oven Bake Element

Charles W from Southfield, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

No current to the burner

Checked the burner and no power to heat the burner. removed the old switch and put on the new one.

Parts Used:

Infinite Burner Switch - Small Element - 240V

terry from Pensacola, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Burners on high all the time.

Replaced control units that were malfunctioning.

Parts Used:

Infinite Burner Switch

Randy from Van, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Element broke in two

My husband fixed it in about 30 minutes or less. He said it was a piece of cake!

Parts Used:

Oven Bake Element

NICOLLE from EADS, CO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

baking element burnt out

It was so easy. We pulled the stove away from the wall and unplugged it. My husband used a nutdriver to unscrew the two screws holding the element in place. He unplugged the wires from it when he pulled it out. He plugged the wires to the new element, screwed it back in place and voila! I was ready to bake. So very easy.

Parts Used:

Oven Bake Element