TBFM17VBML General Electric Refrigerator - Parts

Ice Maker

★★★★★

★★★★★

(77)

This 10 by 5 inch ice maker (Electromechanical Icemaker Kit, Ice Maker Assembly) produces ice. This particular model will produce seven crescent shaped cubes every cycle. It is constructed of plastic ... Add to cart

Light Switch

★★★★★

★★★★★

(60)

The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the sw... Add to cart

Defrost Timer - 120V 60Hz

★★★★★

★★★★★

(7)

This defrost timer will cycle for 25 minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange. If you... Add to cart

Package of 12 Screws This is a package of twelve Phillips-head screws. They can be used as replacement screws in refrigerators, ice makers, or freezers. Be sure to check that your appliance model is compatible with these ...

Crisper Pan Cover

★★★★★

★★★★★

(3)

This cover is located over the crisper pan and also acts as a shelf. Add to cart

Evaporator Fan Blade Kit

★★★★★

★★★★★

(5)

This kit features a 5-blade plastic evaporator fan blade that rotates CCW and measures 4.5-inches in diameter and has a 3/8-inch-tall shaft. This kit also has a metal compression ring that secures the... Add to cart

1/4 Tubing Nut

★★★★★

★★★★★

(4)

This is a quarter tubing nut and is sold individually. The tubing nut works in conjunction with your refrigerator/freezer and is made entirely of plastic. The function of this part is to connect the l... Add to cart

EVAPORATOR FAN MOTOR KIT

★★★★★

★★★★★

(8)

This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer come with the part. Add to cart

Condenser Fan Motor

★★★★★

★★★★★

(1)

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals. Add to cart

Water Tubing Clip This water tubing clip, also known as a P-clamp, is usually used within refrigerators and freezers to organize the water line and tubing, but due to its versatility, this clip may also be used in othe... Add to cart

Fill Tube Clamp The fill tube clamp is used in refrigerators to support the water tube. If the tubing or hose is working but is loose inside the unit, the clamp could be broken or damaged. If this is an issue your re... Add to cart

Power Cord

★★★★★

★★★★★

(3)

This heavy-duty cord has a three-pronged plug (2 electrical, 1 grounding). The power cord supplies power to your refrigerator, allowing it to keep the contents inside cool. There could be an issue wit... Add to cart