Models > SWSG1031HQ2 > Parts

SWSG1031HQ2 Westinghouse Washer / Dryer Combo - Parts

All parts for the Westinghouse Washer / Dryer Combo SWSG1031HQ2

Below is a list of all parts for the Westinghouse Washer / Dryer Combo SWSG1031HQ2. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the SWSG1031HQ2
1-14 of 196
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Drum Glide - White

Appliance requires 2 .Sold individually.


Drum Support Bearing


Drive V-Belt

This belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.


Thermal Limiter - Limit 220

This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out.


Lint Filter

This filter collects lint as it passes through the dryer vent.


Lower Front Felt Seal with Adhesive


Multi-Rib Drum Belt


Door Catch


'M' Series Ignition Coil Kit

This ignition coil kit contains two coils. One is a two wire secondary coil, while the other is a three wire booster coil. Both should be used together in your gas clothes dryer.


Drain Pump - 120V 60 Hz

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.


Front Upper Felt Seal with Adhesive


Door Strike

"Male" piece of a dryer door closing mechanism.


Water Inlet Valve

This washing machine water inlet valve has two ports for water to enter.


Bearing Bracket

All Parts for the SWSG1031HQ2
1-14 of 196