Models > SWSG1031DS1

SWSG1031DS1 Westinghouse Washer / Dryer Combo - Overview

Get Parts and Repair Help for SWSG1031DS1

If you know the washer / dryer combo repair part you need, you can browse the list of all parts on the SWSG1031DS1, or you can search by name or part description. You can also find your part by where it is located on the SWSG1031DS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer / dryer combo. We’ve also included any installation videos we have for SWSG1031DS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$20.00

Drum Glide

Sold individually. 2 are required.

$3.17

Drum Support Bearing

$8.16

Rotary Knob

This knob includes tension spring clip and will accept a D-shaped shaft.

$13.86

Drive V-Belt

This belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.

$16.04

Lower Front Felt Seal with Adhesive

$19.41

Lint Filter

This filter collects lint as it passes through the dryer vent.

$14.08

Multi-Rib Drum Belt

$99.86

Drain Pump - 60Hz 120v

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.

$13.81

Front Upper Felt Seal with Adhesive

$24.23

Door Catch

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer start knob broke

  • Customer: Cynthia from Athens GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 363 of 365 people found this instruction helpful
Googled dryer start knob, Part Select was second site I clicked on, found within 1 min, part was inexpensive, easy to order, arrived quickly and fit perfectly. Excellent online ordering experience. read more

replace broken drive belt

  • Customer: rodney from fairfield bay AR
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 106 of 122 people found this instruction helpful
carefully pry up on front washer top to release plastic keeper pins,remove 2 phillips screws from beneath lower front washer panel,slightly lift upward on panel to release.remove old broken belt,push new belt beneath large tub pulley,put belt on small motor pulley,push back belt tension /idler arm,start belt on large tub pulley,turn tub pulley by hand to run... read more

would't spin all water out or rinse out clothes

  • Customer: kenneth from willard OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 63 of 75 people found this instruction helpful
uplugged washer took front off washer 2 screws pryed up top pump was mounted with 2 screws and 2 wires took off found change in pump and the fins to pump worn off ordered part off line the wait for part was longer than the amount of time to fix problem and cost of part saved me about $25-35 if I was to buy local worth wait save money and fix problem washes l... read more