Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Below is a list of all parts for the Westinghouse Dryer SGR341AS1. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This motor has a double shaft.
This part senses the flame for heat allowing the gas valve to open. The most common issue that might arise that would indicate the flame sensor needs to be replaced is your dryer is not giving off enough heat. If your clothes are not drying at a reasonable time, this might be your first indication of an issue. You will need to remove the two screws underneath the lint cover to remove the top of the appliance. Release the door switch wiring, remove the front panel, and remove the belt off the pully. You should now be able to completely remove the drum from the dryer. This will give you access to the sensor for the repair.
Part may differ in color from image. Please note that this is only a cosmetic difference.
This part ignites the gas within the dryer. Be sure to not handle this igniter by the gray part as it is very fragile.
This grounding ball clip is made of metal. Sold individually.
This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temper...
Adhesive is sold separately.
The gasket is used to help keep in the hot air in the dryer from escaping and to prevent the cool air from entering in to the dryer.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.