Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SGR341AQ3 > Parts

SGR341AQ3 Westinghouse Dryer - Parts

All parts for the Westinghouse Dryer SGR341AQ3

Below is a list of all parts for the Westinghouse Dryer SGR341AQ3 - White / Gas. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the SGR341AQ3
15-28 of 102
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$118.77

Drive Motor with Pulley

This motor has a double shaft.

$22.09

Flame Sensor

This part senses the flame for heat allowing the gas valve to open. The most common issue that might arise that would indicate the flame sensor needs to be replaced is your dryer is not giving off enough heat. If your clothes are not drying at a reasonable time, this might be your first indication of an issue. You will need to remove the two screws underneath the lint cover to remove the top of the appliance. Release the door switch wiring, remove the front panel, and remove the belt off the pully. You should now be able to completely remove the drum from the dryer. This will give you access to the sensor for the repair.

$29.28

Idler Arm Assembly

Part may differ in color from image. Please note that this is only a cosmetic difference.

$9.43

Adjustable Leveling Foot - Black

This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling, it may indicate that the levelling foot needs to be replaced. You will need pliers and a block of wood to perform this task. There will be one adjustable foot found in the package. Lift the dryer and place the wood to keep it propped up. You may need to use the pliers to remove the old foot. Screw the new foot into place using your hand. Once the new leveling foot is in place, lift the appliance and remove the block. Test the machine out to ensure it is now sitting level.

$19.69

Igniter

This part ignites the gas within the dryer. Be sure to not handle this igniter by the gray part as it is very fragile.

$6.11

SCREW

$7.88

Grounding Ball Clip

This grounding ball clip is made of metal. Sold individually.

$6.36

SCREW

Sold individually.

$28.54

High Temperature Adhesive

This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temper...

$34.86

Seal

Adhesive is sold separately.

$13.12

High Temperature Lubricant

$33.31

Door Gasket

The gasket is used to help keep in the hot air in the dryer from escaping and to prevent the cool air from entering in to the dryer.

$21.25

Idler Arm Spring

$7.69

Single Clip

Sold individually.

All Parts for the SGR341AQ3
15-28 of 102