SDG3606AWQ Maytag Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer wouldn't heat at all
On line video was great and easy to follow. The only problem I encountered was with removal of the front panel. Ours is a 20-year old dryer and the front configuration is different. You cannot lift the top, as shown in the video, before you remove the front. There is a lower front panel that has two 5/16" screws at the bottom and drops off. There are two 5/16" screws in the bottom of the door panel which allows it to drop off. Finally you remove two 5/16" screws in the brackets that hold the top to the sides and the top then tips up and to the rear. From there on the video is perfect.
Parts Used:
-
Michael from White Heath, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
dryer was making a real loud grinding noise, like nails on a chalk board.
Really easy popped the lid with a flat head screwdriver, then marked wires for door light and switch, took 2 5/16 bolts to remove front door, then 4 bolts also 5/16 to remove front panel but be care ful and remove drum belt then take panel and drum out. Then took a set of ring pliers to remove wheel slapped new one on.then reverse sreps to assemble.
Parts Used:
-
mike from minooka, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!