Models > SA31HA-10XS-R > Instructions

SA31HA-10XS-R Admiral Range - Instructions

All installation instructions for SA31HA-10XS-R parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the SA31HA-10XS-R
1-15 of 34
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

leak

  • Customer: George from Plainville MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 8 of 10 people found this instruction helpful
removed then installed new unit by hand. received order the next day-am. delivery time great.

spring broke on one side of door hinge

  • Customer: Travis from Lexington OK
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 7 of 8 people found this instruction helpful
Pulled the stove out, removed the sides and attatched the new springs( replaced both while the stove was out). Worked like new and put the stove back.

the burner knobs broke off

  • Customer: Belinda from Downey CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 12 people found this instruction helpful
I put the 2 burner knobs on and now I have 4 working burners....Thanks for the quick delivery....

Gas manifold had holes in it.

  • Customer: Mr. J.C. from Haines City FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 5 people found this instruction helpful
Removed locking wire from bottom burner assembly then I pulled the element out and replaced with the new one.

original light grey color grates stained and unsightly--no amount of scrubbing or cleansers would make them look nice.

  • Customer: Linda from Jenison MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 11 people found this instruction helpful
Opened the box and took out the black color grates~~removed discolored grates and put the new ones on. Looks like a brand new stove and much nicer to look at as it is the first thing you see when you enter the kitchen.

HAD TO CHANGE THE KNOB I COULD NOT READ IT

  • Customer: ANDREA from CORNING CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 6 people found this instruction helpful
PULLED THE OLD KNOB OFF AND PUT THE NEW ONE ON. ONLY THING THAT WAS DIFFICULT WAS MAKING SURE THE KNOB WAS THE RIGHT ONE BECAUSE THE INSTRUCTIONS KEPT LEADING ME BACK TO A DIFFERENT BRAND OF APPLIANCE BUT SINCE THE PHOTO LOOKED ALIKE I WENT AHEAD AND GOT IT.

A high flame was coming out of the side of the burner

  • Customer: KAY from BRIDGEPORT CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 3 people found this instruction helpful
Easy......pulled out the old one easily and popped in the new one.......saved a lot of money...no repair bill for either diagnostic fee or assembly fee ...No mark up for the part either. Very happy mom!

Install valve knobs

  • Customer: Donald from Peebles OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 5 people found this instruction helpful
This was not a difficult task. I just slid the valve knob on the shaft, repair was complete. This was a very easy diy project.

Freont burners of both units had rusted though over the years of boilover.

  • Customer: Angelo W. from Chirfland FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Lifted lid, removed old burner units, replace with new ones. In Less than two min. was back up and cooking.

Door Spring Broke

  • Customer: Thomas from Van Nuys CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 2 of 3 people found this instruction helpful
Removed 7 screws on sides and one on top of stove. Replaced both springs (only one was broken but did both). Took around 15 to 30 minutes from start to finish.Fastest shipping in history during holidays without paying anything extra.

Broken burner knobs on stove.

  • Customer: Barbara L. from Tewksbury MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
Just replaced the old burner knobs with the new !!!

needed a new knob

  • Customer: Clayton from Shortsville NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
pulled the old one off and push the new one on

Thermostat bulb was hanging loose

  • Customer: Willi from Old Saybrook CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 2 of 5 people found this instruction helpful
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub

30 year old gas stove needed a new burner assembly.

  • Customer: Caroline from South Windsor CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
We lifted up the stove top, slipped the burner assembly in. It fit! who knew that we could get a part to an old stove without the model number, just by looking at a picture of the part! Terrific!

Original Knobs broken; would not work

  • Customer: Lorraine from Prosperity SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 1 of 3 people found this instruction helpful
Removed the aftermarket knobs I originally bought (they would slip or not turn at all) and installed the new Magic Chef knobs on stove. They work perfect! No problems, easy to install and work every time. Thank you so much for your quick shipment. It is now fun again to be cooking, and not worrying about whether the knobs will turn or not. Thank you, thank you
All Instructions for the SA31HA-10XS-R
1-15 of 34