RVM1325WW03 Hotpoint Microwave - Instructions

I went to use our microwave the Thursday before Christmas and the handle broke right off in my hand. I had to get to work and i did not tell my wife. By ten o'clock she called me and said the handle broke off when she used the microwave. I said I would try to find one and I did at PartSelect.The shipping I chose said 3 to 5 days.I placed the order about 2:30 that afternoon.The next day my wife called and said the handle had arrived and she put it on herself. Thanks for your prompt service, Allan Carignan

removed the bottom plate from microwave and replaced parts

Opened microwave door,removed top and bottom screws (phillips), discarded old handle, put new handle in place, installed top and bottom screws in new handle, closed microwave door. Hard part was discarding the old handle because it required pulling out the trash can drawer(ha-ha).

llation

Pulled it from the wall remove the front vent covers removed the control panel remove the door switches by a special screw driver bit which looks a star remove the electrical terminals pressed the plastic clip pulled the switch replaced it with new one then followed initial steps backward

had to use pliers to grab a nub of the plastic screw female that had broken off. Other than that, went easy. This is a product defect and not only should the part be free, but there should be a free retrofit repair.

Your part was here quickly and perfect.

Great job, thank you.

I first removed the broken door handle by removing two screws and replacing it with the new handle.The new handle was the exact size of the old handle,the holes lined-up perfect.I ordered the handle on thurs. and expected to get it the next week. I got the part Sat.

I went on the PartSelect page and found the model # for my microwave and ordered the handle. I thought I was going to have to wait for several weeks but it arrived in three days. The only glitch was that the plastic end of the broken handle was still attached to the screw and I couldn't get a grip on it in order to remove the screw...so I tried several different things... ultimately using a corkscrew to pierce the old piece of plastic handle thus allowing me to remove the screw and in two minutes I was able to replace the handle.
I can't believe it was that easy. Thank you.

Piece of handle was still wrapped around the screw..took a little while to get the old part off only took about 2 minutes to install the new part...it was a perfect match and fit perfectly.

Simply removed screw, pulled down light holder, unfoled the metal tabs, took out the broken pieces and replaced the glass lens and light bulb.

unscrewed the screw, pried up metal tabs that hold in light lens. took out broken pieces, slid in new light lens re-secured tabs with fingers, screwed in the screw again.

Removed a top and bottom screw. Pulled off the broken handle, put on the new handle, replace the 2 screws and about 60 seconds later, the repair was complete. Parts select seems to always have what parts I need and thats terrific.

Removed two screws and installed the new handle. The broken handle was no big deal.

Removed remainder of door handle by unscrewing top and bottom. Screws were still intact and easy to remove. Replaced with new handle. Very simple. Ordering was easy and precise. Part received within 3 days. Schematic provided at website provided detailed information to ensure proper ordering.

remove two screws bend out flaps remove broken glass install new glas bend flaps back to hold glass install two screws. Done.