Below is a list of all parts for the Roper Refrigerator RT21LMXKQ04 - Top freezer, Top-mount. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
***NOTE: Ice maker does NOT come with the bail or shut off arm. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mountin...
This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number.
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.
Also known as a Water Solenoid Valve.
The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into th...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
NOTE: This motor uses 2 brackets which are sold separately.
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
This light switch is triggered by the door opening and closing.
End caps are sold separately.
This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.