RT14DMXBW00 Roper Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice maker wasn't making ice
Pulled out the icemaker. Switched out the Motor Assembly (so easy) and woke up the next morning with ice. Our ice dispenser wasn't working either. This repair inspired me to take the ice dispenser apart and I found that the lever arm wasn't touching the contact when pressed. We now have ice and a working ice despenser. Oh yeah--my wife was so impressed. The part came in on time and it was very very easy to replace.
Parts Used:
-
Rich from Holly Springs, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker tray would not empty, had ice in the try
unplug frig, didnt turn off water used cord light to see. Took 1/4 nutdriver and loosen screws removed screw on bottom bracket uplugged ice maker. reversed the process for the new one and done
Parts Used:
-
TOM from HOUSTON, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice Maker inlet valve stuck open
Shut water off to stop leak. Purchased new valve but it had different size fittings. Proper hardware was not included with the new part and was not available from PartSelect or Whirlpool, the maker of KitchenAid. I'm a paraplegic so my brother came over after I got the parts and the hardware. He was able to install the valve but it didn't work while he was here so he shut off the water supply and I'll have to wait and see if it works some other time. Until then, looks like I'll be using trays.
Parts Used:
-
Mark from Shelby Township, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!