RS22BRXDN00 Roper Refrigerator - Instructions

First of all when deciding where to order part from I could have saved a couple of bucks on another site but I chose PartSelect because of the video showing exactly how to install the part. When installing the new part it went in exactly as described. Part seems sturdy. Ice bin now works like new again. Hopefully it will last at least as long as the original. Part was good, delivery was quick. I will look here again if I need more parts for any appliance.

Took out the door bins, 1 bolt on the plastic cap, 3 bolts on the hinge, took the door off, replaced cam at the bottom, all same size bolts, reset the door spent longer time cleaning the door selfs all done by my self in less than 30 min. others said it helped to have second pair of hands "my wife would of just got in the way :)"

Fowolled the video instructions except it was necessary to disconnect the damper control rod to correctly install the capillary tube. the defrost timer was extremely easy to replace after determining the correct terminal for the black motor lead. The side by side is working great with the new parts and I would recommend your product and web site.

Removed the broken auger blade part,replaced it with the new one. Simple easy,and with the fast service you provided repair was accomplished quickly. Will contact your company for all of my whirlpool parts needs.

Made the order which came in a timely fashion. But the new pan was cracked. I immediagely called. The agent was friendly, personable, and helpful. She ordered a new pan, but it didn't come as it was supposed too. Yesterday I went to the barn and , yep, it was there! Why fedx put it there I don't know. But it is in good shape. Only complaint it that I have to keep the other part for 30 days to wait for notification whether they want it back or not! Otherwise very glad to have this issue solved.

Had a 1999 Kitchenaid Superba refrigerator that quit making ice. Based on online research, my icemaker's problem could have been either the icemaker itself or the dual water valve. I opted to try the icemaker replacement first after watching the helpful installation video. The only issue I had that made the repair the slightest bit difficult was that bolt-headed screws were used to secure the icemaker to the fridge wall rather than Phillips and the one nearest the door can't be seen while trying to loosen it. It only took an extra ten minutes to overcome this obstacle (maybe 20 minutes total). After replacing the icemaker, I thought the water valve must have been the problem after all since the unit did not immediately start filling with water. However, once the unit chilled down, it worked perfectly.

Loosened 2 screws,un pluged the wiring harness,pluged the new ice maker in,tightened the 2 screws. . And I now have ice!! Very easy to install. .

Found the replacement icemaker I needed on your web site,ordered and recdeived it within 2 days. Watched the how to video and did the replacement in less than 5 minutes.However,I waited(2 days) for the icemaker to start working, it never did. Thinking there was another problem in the icemaking system, I contacted a local appliance repair shop. They checked the entire system and everything was ok except the new icemaker. Turns out the new icemaker was defective. I contacted PartSelect and reported the technicians findings. I had another new icemaker in 2 days again. I again installed the new one and am now making ice. Thank you for the installation video and the teriffic service.

1. opened box with new drawer inside.2. washed new drawer. 3. opened fridge door 4. removed old defective drawer and threw it away. 5. Inserted new drawer 6. closed fridge door 7. opened fridge door to put veggies in new drawer. 8. closed fridge door when finished.

determend o.k. water flow,determend solenoids o.k.problem had to be ice maker.ordered part on Su. eve.,recieved new part Tue.A.M.,had part installed in 15 minutes. Then waited for quite a long time untill it finally made ice.

I did the repair just as your video showed me. It worked out great.

installed ice maker control & motor assembly

Per directions supplied

Figured out You have to pop off the cocer than remove the 1/4 hex head screws only not the philips ones

Removed the old one. The new one had a power chord attached but it did not connect to the wire in the freezer. I saw it could be unplugged from the new ice maker and the power chord from the freezer plugged right in. Once installed, was not sure it worked but after a few hours it filled with water and started making ice. Works great now.