Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RS20EKXBW00

RS20EKXBW00 Roper Refrigerator - Overview

Get Parts and Repair Help for RS20EKXBW00

If you know the refrigerator repair part you need, you can browse the list of all parts on the RS20EKXBW00, or you can search by name or part description. You can also find your part by where it is located on the RS20EKXBW00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RS20EKXBW00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 1 hr and 36 mins and your part ships today!
$40.25

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forced-air cooling for the condenser coil.

Order within the next 1 hr and 36 mins and your part ships today!
$16.79

Door Closing Cam Kit

This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in pos...

Order within the next 1 hr and 36 mins and your part ships today!
$61.11

Evaporator Fan Motor - 120V 60Hz

This part is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. Fan blade not included.

Order within the next 1 hr and 36 mins and your part ships today!
$18.18

Shelf Support Stud - White

This kit contains two options - One that is a push and turn and the other that is a screw in.

Order within the next 1 hr and 36 mins and your part ships today!
$27.50

Shelf Support Stud

This is a 12 piece kit.

Order within the next 1 hr and 36 mins and your part ships today!
$7.20

Touch-Up Paint - White

18ml

Order within the next 1 hr and 36 mins and your part ships today!
$35.17

Light Socket Kit

The bulb is sold separately.

Order within the next 1 hr and 36 mins and your part ships today!
$11.07

Spray Paint - 12 oz. - White

Order within the next 1 hr and 36 mins and your part ships today!
$50.21

Front Roller - Kit of 2

Support wheel assembly with bracket. Kit of 2.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

inconsistent compressor and condensor fan operation

  • Customer: Steve earney from Brooks, GA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 222 of 232 people found this instruction helpful
Compressor start relay would cycle several times before compressor would come on. Replaced start relay and defrost timer assy. Operated more consistently however not completely reliable. Ice would begin to melt. Noticed that if you would cycle the temperature control the compressor would start again and operate for several hours then not cycle again. Jum... read more

Sometimes the condenser fan would start causing the refrigerator to overheat.

  • Customer: Tom from Franklin, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 124 of 132 people found this instruction helpful
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire a... read more

The door would not close properly. The CAM had broken.

  • Customer: Thomas from San Clemente, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 119 of 121 people found this instruction helpful
The repair was very simple.

1. Remove the food from the door shelves.

2.Remove the door by first removing the three screws holding the hinge at the top of the refrigerator.

3. Lift door off of the bottom hinge.

4.Replace bottom CAM on bottom hinge (one screw)

5. Replace top CAM and shim on door (one scre... read more