RK966G*09 Hotpoint Wall Oven - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken bake element
turned off the breaker for the oven. removed screws holding old element in place, and carefully pulled the old element out of the back. took apart the wires that came out of the insulation with a screwdriver. replaced with the new one. the first time i did this, the insulation started smoking, i believe because i didn't have the wires screwed on tight enough the first time. but yeah, the hardest part is getting the rusty screws out. i had to do some prying action.
Parts Used:
-
Jennifer from Seattle, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Burned out elements
Part arrived the day after I ordered - unbelievable for our rural delivery !!!!!! Broil element was tough to get wires out far enough to unfastened and refasten new element. Bake element took ten minutes.
Parts Used:
-
Bruce from Angels Camp, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bake element gave out
Simple to install. Shut down power, remove screws, install new element. EASY, and much cheaper than other sites.
Parts Used:
-
Pamela from Fairfield, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!