RK767G*T6 Hotpoint Wall Oven - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broiler element burnt thru
TURN OFF POWER , remove oven door & oven wire racks, remove two retaining screws in back of coil and pull the burnt coil foward enough to remove the screws that hold the wires to the coil. You may have to drop one side of the front support bracket to move coil forward.Fasten the new coil to the broiler wires with the new screws provided. Push the new coil back into place being careful not to pinch the wires in the opening. Refasten coil to the oven back with existing screws that you removed. Refasten front support.Put racks back in and put door back on.Easy fix! Easy to order, easy to install and came within days from order date. Very pleased with whole thing.
Parts Used:
-
Larry from Mendota, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bake element caught on fire.
Removed the two screws that held the bake element retainer in place and then pulled the bake element into oven to remove two screws holding the wiring attached to the end of the old bake element. Pulled bake element retainer over new bake element. Attached wiring to new bake element with screws supplied. Pushed end of new bake element into place and attached bake element retainer to oven with the two original screws. Done in about 5 minutes.
Parts Used:
-
Howard from Peachtree City, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bake unit broken
We went by the comments on your website, it was a piece of cake--works wonderfully.
Parts Used:
-
Terri from Rockwall, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
lower element shorted out and completed melted.
It couldn't have been easier. "piece of cake. for safety, always turn the breaker off, remove the old one and install the new element. You can do it.
Parts Used:
-
Dennis from Kingwood, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
burned out bake element
Nothing to it, all it took to remove four srews, remove the element and reassemble in reverse.
Parts Used:
-
Sigurd R from Plymouth, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broiler element exploded,fractured after only 25 yrs use
power off at breaker--removal of both elements from oven frame simple--then very short connecting wires and unremovable oven door prolonged replacement for poor access--works fine now--especially pleased w incredibly rapid receipt of parts from Part Select
Parts Used:
-
James from Queensbury, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Bake element burned out
Easy replacement: 1/4 in. nut driver to loosen two retaining screws, unscrew two wires. Assembly removed and replaced with new bake element. Attached wires, replaced two retaining screws and unit is ready to cook! Bake element is a perfect fit, easy replacement, with no prior experience required. I'm sure I saved quite a bit of money by repairing myself.
Parts Used:
-
Mike from Midland, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
A burned lower oven element.
We unplugged the range. My husband removed the burned element and installed the new element. There was no problem either way. The worst part was getting up and down from the floor. He is 87 years old and doesn't bend like he did 20 years ago. Now if someone would clean the oven for me, it would be great.
Parts Used:
-
Patricia from Eugene, OR
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Stove wouldn't bake
Our son unplugged the stove, took a socket fitting the nuts and pulled the old bake element out. He then put the new one in plugging up the wires and screwing the nuts back in. Plugged in stove and works perfect!
Parts Used:
-
Cheryl from Chapmansboro, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Old Bake Element was not functioning
Reatached to the oven white and black wire connection to the element with the screws provided in 10 minutes.
Parts Used:
-
Harry from Greenville, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The bake element broke, so it quit working.
This oven is really weird and is approximately 50 years old. We would have had to do a significant renovation to get another stove/oven into the space. I had to use a drill to remove the old element and had to drill new holes to screw in the new element. I measured the old element and was lucky to find one that was compatible. Thanks!
Parts Used:
-
Michael from Shreveport, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
bake element went out.
Turned off power to oven! Removed 2 screws and carefilly pulled element out about 2 inches then removed 2 more screws and removed old element. Installed new element. Done! It actually took me longer to type this than it did for the repair.
Parts Used:
-
Dorothy J. from Sealy, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Burn-Out Baking Element
Unpacked new part , shut off electric breaker to range. Removed both screws that held element to oven wall. Pulled out old element so I could loosen to screws that held wires to element. Loosened these, got new element attached wires to new element pushed back in to oven wall and put both screws back in to hold new element against oven wall. Put cooking racks back in , closed oven door. Turned power back on then tested oven and new element worked great. This was a very easy fix for me and would be for a lot of people mr. Green
Parts Used:
-
joseph from Piqua, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The lower element stopped working.
Removed the two screws holding the element into the back of the oven, pulled the element out about 6 inches, removed the screws holding the attached wires, attached the wires to the new element, pushed the element back and attached the two screws that now held the new element secure to the back of the oven.
Parts Used:
-
EDWIN from ONEONTA, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
burnt element
-
Dennis from winnsboro, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!