RGB745GEH1 Hotpoint Range - Instructions

Ordered new igniter switch, but Fedex lost it! Partselect sent new one overnight. Really a cinch to install. Be sure to unplug oven or turn off breaker if you are not comfortable with working with live electrical wires!

It took only ten minutes to locate the correct replacement switch for my 20+ year old GE range on the PartSelect website, and only two days for it to arrive at my home. After removing the rear panel behind the control module, it became apparent that there were clips on each side that held the glass front panel in place. I removed the screws for each clip and the thumbscrews on the two front-mounted switches, and the glass panel came free easily. Wiring for the new switch was simple plug-and-play (4 leads), and reassembly was a snap. I was VERY careful with the glass front panel, which is NLA as a replacement part.

Pulled the knob's off the front of the stove. Removed 7 phillps screws holding on the front plate, pulled off the front plate, removed the ignitenr, and then reassembed the stove. It worked great.

I just had to lift the top of the stove. Then pull the old burners out and put the new ones. It took longer to ignite the flame than replace the burner. Works great !!!