Models
>
RGB745GEH1
RGB745GEH1 Hotpoint Range - Overview
Sections of the RGB745GEH1
[Viewing 4 of 4]Keep searches simple, eg. "belt" or "pump".
Broiler Pan - Large
PartSelect #: PS1517612
Manufacturer #: WB48X10056
This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures ...
$30.07
In Stock
Ignition Switch
PartSelect #: PS237147
Manufacturer #: WB24X379
This part creates the spark that lights the gas and starts the burners.
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
No Longer Available
Drawer Glide
PartSelect #: PS248279
Manufacturer #: WB39X60
This drawer glide is sold individually. It may not resemble the original glide, but it will fit and function the same.
No Longer Available
Burner Igniter
PartSelect #: PS242243
Manufacturer #: WB2X4306
Usually used for Broil.
No Longer Available
Questions And Answers for RGB745GEH1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner would not light
Ordered new igniter switch, but Fedex lost it! Partselect sent new one overnight. Really a cinch to install. Be sure to unplug oven or turn off breaker if you are not comfortable with working with live electrical wires!
Parts Used:
-
Gary from Riverside, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The switch for the stovetop fluorescent light failed.
It took only ten minutes to locate the correct replacement switch for my 20+ year old GE range on the PartSelect website, and only two days for it to arrive at my home. After removing the rear panel behind the control module, it became apparent that there were clips on each side that held the glass front panel in place. I removed the scre
... Read more
ws for each clip and the thumbscrews on the two front-mounted switches, and the glass panel came free easily. Wiring for the new switch was simple plug-and-play (4 leads), and reassembly was a snap. I was VERY careful with the glass front panel, which is NLA as a replacement part.
Read less
Parts Used:
-
Keith from Mercer Island, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench set
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right front burrner wouldn't start
Pulled the knob's off the front of the stove. Removed 7 phillps screws holding on the front plate, pulled off the front plate, removed the ignitenr, and then reassembed the stove. It worked great.
Parts Used:
-
Joseph from Clay, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!