RF267AEWP/XAA Samsung Refrigerator - Instructions

Unscrewed 1 screw, removed panel, disconnected old icemaker and removed it, Added new icemaker, reconnected, replaced panel, replaced screw, & reset new icemaker. Started making ice almost immediately. Threw out entire first load of ice. Working great since! I wasn’t sure if it was the icemaker or the water valve to it so had a guy come out ($50) who confirmed it was the icemaker. He wanted $550 to replace it (part/labor). We bought the part here at Part Select for $185 (part/tax/delivery) and saved $265 on a job that took less than 15 minutes.

Once I understand how to remove the old part the rest was very easy .
Had ice in a couple of hours .

Went on the Internet to find the installation instructions.

Took shelving out of freezer removed panel. Took second panel
out and removed motor. Whole repair took 45 minutes. Works perfect

It was simple. I pulled out the old seal from the track it was tucked in and put the new one in using a wood spatula to help along the folding part of the door that fits behind the other door. I replaced both seals under 15 minutes. I am a 63 year old female so I know if I can do it so can you!
Tip: make sure that you line up the top and bottom and from side to side evenly before you start pressing it into the track.
Refrigerator is working properly now.

It was easy! I just used an alan wrench to losen the side bolt, then slid the handle into the new mounting screws that I had hand-screwed and then tightened it all up.