Models > RED4000SW0 > Parts

RED4000SW0 Roper Dryer - Parts

All parts for the Roper Dryer RED4000SW0

Below is a list of all parts for the Roper Dryer RED4000SW0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the RED4000SW0
1-14 of 106
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Thermal Fuse

This part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when continuity between the pins...


Multi Rib Belt - 92-1/4"

This dryer drum belt has four ridges, three grooves and is 1/4" wide.


Heating Element - 240V 5400W

This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. Th...


Thermal Cut-Off Kit

This clothes dryer thermal cut-off kit includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.


Door Catch Kit

This kit contains two door strikes, and various door catches to service dryer doors that have one or two catches.


Maintenance Kit

NOTE: This kit is for 29" wide dryers built 1965 or later. Please verify model # before ordering as may not work for all models. This kit comes with one multi-rib belt, two drum support rollers, one idler pulley, four tri-rings, and one clip. This part can be used with both gas and electric dryers.


High Limit Thermostat

This hi-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Farenheit, th...


Drum Support Rollers

These two drum support rollers are no longer available for individual sale. Available in a package of two and it is recommended that you replace both rollers at once. These two rollers come with four tri-rings and one palnut.


Idler Pulley Assembly

This part provides the tension required for a multi-ribbed belt. It also serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.


Leveling Foot

Sold individually.


Heating Element Connection Wire Kit

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.


Tri Ring

Sold individually.


Push-to-Start Switch

This part starts the drying or washing operation.


Drive Motor with Pulley

This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.

All Parts for the RED4000SW0
1-14 of 106