Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RAX7244KQ0 > Parts

RAX7244KQ0 Roper Washer - Parts

All parts for the Roper Washer RAX7244KQ0

Below is a list of all parts for the Roper Washer RAX7244KQ0 - Residential . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the RAX7244KQ0
15-28 of 214
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.88

Leveling Spring

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.

$16.52

Suspension Pads - Package of 3

$4.36

GASKET

This part may also be referred to as a main outer tub seal. This part prevents leaking from the bottom of the tub. The gasket is approximately 2 inches in diameter to the outer edg...

$2.90

Foot, Front - Single

The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause it to vibrate and/or shake during the cycle. The function of the adjustable foot is to keep your washing machine supported and to make sure that it is level at all times. The tools you will need for this repair include a pair of channel lock pliers, and a 9/16 wrench.

$19.16

Drain Hose

It connects from the pump to the back panel.

$3.02

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

$4.40

Pump Retainer

Sold Individually.

$3.02

Lid Hinge Mounting Screw

Sold individually.

$4.89

Strike, Lid

This part is used to activate the lid switch when the lid opens/closes.

$16.19

Tub-to-Pump Hose Kit

This kit comes with the clamps.

$3.02

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$9.64

INLET HOSE

This hose can handle hot or cold water and is five feet long.

$5.73

Washer

This part goes on the agitator retaining bolt.

$16.93

Fabric Softener Dispenser

Use this dispenser for your direct drive washing machine.

All Parts for the RAX7244KQ0
15-28 of 214