Models > RAB4132AL1 > Parts

RAB4132AL1 Roper Washer - Parts

All parts for the Roper Washer RAB4132AL1

Below is a list of all parts for the Roper Washer RAB4132AL1 - Residential, Automatic. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the RAB4132AL1
1-14 of 204
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Direct Drive Motor Coupling

This coupling kit is used between the motor and the transmission on direct drive washers with no belt. This is the newer version and is made with new metal sleeves for added stren...


Direct Drive Water Pump

It is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one.


Water Inlet Valve with Mounting Bracket

This part could have either a blue colored valve body or a green colored valve body. There are two ports for water to enter and this valve is compatible with a half inch ID hose. I...


Clutch Assembly

A worn clutch can cause a slower spin speed which will leave your clothes wet after a cycle. This clutch assembly comes with brake cam driver, blue spring for large capacity washers and black spring for compact washers. As per factory, the green spring (1.24") replaces the black spring (1.46").


Suspension Spring

Sold Individually. Appliance takes 3 of this part.


Tub Spring

This part is used to balance the tub during spin cycle. Sold individually. It is recommended that you replace all 3 at the same time.


Agitator Bolt

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".


Lid Switch Assembly

This part makes sure that the lid is shut before allowing the machine to start or agitate.


Tub Wear Pads - Package of 3

This package of pads contains three brown tub wear pads.



This screw is sold individually.


Foot, Front - Single

Sold Individually.


Hose Clamp


Cover Screw

Sold individually.


Leveling Spring

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.

All Parts for the RAB4132AL1
1-14 of 204