PYE2200AKW Maytag Dryer - Instructions

Exactly as described by the video.

I used a putty knife to push in clips to lift the top of the dryer off to gain access to the thermal fuse and the high limit device. The thermal fuse was close to the top and easy to do. The high limit part was a little further down the back side of the dryer and a little harder to get to, but watching the video online helped a lot. The most important part was fixing the root cause of the dryer. Lint. I empty the lint tray every single time I dry a load, however, after removing the front panel, I found 12 years of lint packed into the channel. (You may want to do this BEFORE your dryer goes out.) After removing the lint and replacing the parts the dryer works like new again, and it only took about 30 minutes! I am a 57 year old woman so if I can do this anyone can. The best part was that I ordered my part on a Tuesday morning and it was delivered the very next day! Great service!

Replaced it.

Watched the video and performed as instructed- Could not have been easier- Great site with Great information

I came home from work to notice the dryer singing a different tune than usual. I opened the door and noticed that the tub wasnt turning. I popped the top of the dryer up to find a disentigrated belt. Fired up the computer and in a few minutes had ordered the $8 ($15 including shipping) replacement belt. 3 Days later took the shopvac and cleaned up the lint and broken belt pieces. Installed the new belt and was back in business with my 8 year old dryer. ** The only complaint comes from my wife who got her hopes up for a new front load washer and dryer** thanks partselect for saving my wallet in more than one way!