Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PLGC30S9ECA > Parts

PLGC30S9ECA Frigidaire Cooktop - Parts

All parts for the Frigidaire Cooktop PLGC30S9ECA

Below is a list of all parts for the Frigidaire Cooktop PLGC30S9ECA - Gas. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the PLGC30S9ECA
1-14 of 55
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Medium Burner - 9.5K


Sealed Burner Head - 14k


Igniter/Orifice Mounting Screw


Spark Module

This spark module or range spark module, is used in ranges and ovens. The spark module monitors and controls the spark to ignite the surface burner in a range. It does this by sending a certain amount of current to the igniter to produce that spark. If you are not getting any spark to the igniters then it is best you replace this part with a new spark module. To repair, first remove the access panel at the back of your range with a 1/4 inch nut driver to take the screws out. Next, disconnect the power harness that connects the range to the power cord to access the spark module. Take wires off using needle nose pliers and pull the spark module off the range. Match and hook up the wires to the new part. Refer to the manual provided by the manufacturer for further installation instructions and guidance.


Top Burner Orifice - 9.5k




Burner Head

This burner head is used on gas stovetops. It is located underneath the burner cap.






Burner Skirt - Black - 14K


Gas Surface Burner







Top Burner Orifice - 12k

All Parts for the PLGC30S9ECA
1-14 of 55