PDW7880J10SS General Electric Dishwasher - Instructions

Nick from Chatham, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken stud axle

replaced it.

Parts Used:

Danilel from Hillsborough, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

wheels were falling off of the lower rack of my dishwasher

I removed the old ones (or atleast the ones that were still hanging on). I put the two pieces together (lower axle and wheel) and then just snapped them into place. Piece of cake even for a girl (which I am)

Parts Used:

Vickie from Scottsdale, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Missing 4 wheels on lower rack

Very easy to use website. I put in model number, followed the parts to bottom rack, looked at picture, and selected the wheels and axles. Arrived quickly. It took only a couple of minutes to snap the wheels on the axles, and then snap them in place. Great experience! Made the dishwasher (bought in place with the new house) useable.

Parts Used:

BJ from San Diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Several

There is nothing to tell I order send to location and their maintenance installs

Parts Used:

Charlene from Nashville, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Rt Front Wheel Axle broken on top dryer tray

Used diag wire cutters to remove temporary cable tie that I installed to make temp repair. Positioned redesigned GE OEM wheel axle on tray, snapped in place. Walked away after abt 1 min repair job.

Parts Used:

Dishwasher Dishrack Rollers and Axles

John from Lilburn, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

soap dispenser latch was broken & didnt shut

We had to replace the soap dispenser. My husband is not very handy & this was a snap. You take off the front panel (cover) of the sishwasher & simply unscrew the old one & screw in the new one. I probably could have done it myself.

Parts Used:

Detergent Dispenser with Rinse Cap

julie from Saint Charles, MO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Wheels on dish rack were falling off due to hard water and water temperature..

Snapped off the old wheels and clips and installed the new wheels. Make sure the wheels are installed on the holder prior to snapping the clip onto the dish rack. Very easy job.

Parts Used:

Robert from White Stone, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

wheels worn out kept coming off

Just snap wheel axle into wheel then snap the whole wheel assembly on to rack.Much better design.

Parts Used:

chris from Lordsburg, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

End Cap Broken

Removal of the old end cap required pliers. Not too difficult. The new end cap simply snapped into place. Both end caps on the two rack slides replaced in less than five minutes.

Parts Used:

Daniel from Odenton, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

4 wheels missing from diswasher rack (lower)

removed the rack and snapped the 4 week/axle assemblies on rack by hand pressure returned rack to track.

Parts Used:

Richard from Oak Hill, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Rack end cap was lost or missing

All I had to do was slide the rack forward slightly, reach back to the end of the rack and snap the end cap into place. It helped to have someone there to balance the rack while I was replacing the cap.

Parts Used:

Jennifer from Silver Spring, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

end cap broke

The end cap took about 2 minutes to replace. I received my part quickly and installed it really quick and easily.

Parts Used:

Stacy from The Villages, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Discovered that the end caps were broken

Removed the broken items and clicked the new ones in place utilizing a pliers

Parts Used:

Timothy from Chatham, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The end cap broke off so when we would pull out the upper rack the whell would fall off of the track.

The end cap snapped into place perfectly without any problems and the rack works like new again. This is the second time I have used PartSelect.com and I am very satisfied with how fast I recieve the product and the easy of finding what I need. I would recommend them to anyone!

Parts Used: