Models > PDET910AYW > Parts

PDET910AYW Maytag Dryer - Parts

All parts for the Maytag Dryer PDET910AYW

Below is a list of all parts for the Maytag Dryer PDET910AYW - Residential MAYTAG LAUNDRY. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the PDET910AYW
1-14 of 90
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.64

Drum Support Roller

This roller is for square-ported models and has a metallic bearing in its center. They are sold individually and most dryers use 2 rollers at the rear and it is recommended to repl...

$12.57

Multi-Rib Belt

At 93-3/8" in length, this flat dryer drum belt has 5 ridges and is 3/8" wide.

$3.91

Drum Glide

This drum glide is sold individually. ***Please Note: these should be replaced in pairs.

$4.46

Thrust Washer

$31.70

Lint Filter

***Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.

$5.84

High Limit Thermal Fuse

Meant as a backup to a high limit thermostat, this fuse is typically set to trip at a higher temperature than that of a high limit thermostat. This is a one-time use fuse, so when it does trip, you do need to replace it. It's letting you know that something is wrong with your dryer.

$16.61

Idler Lever

The spring for this part is sold separately.

$2.70

Retaining Ring

Sold individually.

$11.78

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$16.61

Cylinder Felt Seal

$3.91

Single Drum Glide Felt Pad

This part is used on the front dryer drum glides.

$12.92

Door Switch Kit

This part replaces older two terminal switches.

$37.55

Heating Element - 240V

This orange dot heating element replaces those elements with an orange dot on the element flange.

$23.59

Limit Thermostat

This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 225 degrees Fahrenheit. The element will kick back in when the temperature drops to 185 degrees Fahrenheit - the differential of 40 degrees.

All Parts for the PDET910AYW
1-14 of 90