Models > MMV4205BAW

MMV4205BAW Maytag Microwave - Overview

Get Parts and Repair Help for MMV4205BAW

If you know the microwave repair part you need, you can browse the list of all parts on the MMV4205BAW, or you can search by name or part description. You can also find your part by where it is located on the MMV4205BAW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.66

COUPLER

This part is located under the glass cooking tray in the microwave to help it rotate.

$20.48

Glass Cooking Tray

$3.91

FILTER-AIR;SMH7175,AL-ME

$20.79

Microwave Light Bulb - 40W

$26.71

Micro Switch

$8.18

PLATE-MOUNTING;GE 1.6 NE

$5.82

FILTER-CHARCOAL;SMH7175, SMH7195,AL,CARB

$41.58

Turntable Roller Guide

This roller guide sits underneath the glass turntable tray.

$3.50

THERMOSTAT;NT-101NA,250/

$3.34

ASSY-HVD;HV03-12,MWO-

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Turn table wouldn't turn in my microwave.

  • Customer: Linda from Crescent City CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 13 people found this instruction helpful
This was no big deal. Just inserted the new gadget under the turntable. It beginning turning as soon as I pressed start on the microwave.

What I was impressed with, is that I ordered it on line, and within two days my part was sitting on my front porch. I was very happy about the delivery. I live in a remote area, and didn't expect it for a we... read more

coupler under plate in microwave broken

  • Customer: WILLARD from SHINNSTON WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 7 people found this instruction helpful
We ordered part from store where we bought the microwave. We waited a week and the part was not the right one. I found the part I needed at your company. I received the part the next day. I just inserted the coupler in the hole where the other one was and fixed the problem imediately. We will buy all our parts here from now on. read more

Both bulbs burned out at same time

  • Customer: JOHN C from NORTH BEACH MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 21 people found this instruction helpful
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten read more