Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Below is a list of all parts for the Maytag Microwave MMV4205AAQ - Hood Combo. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This light bulb is a 120 volt, 25 watt incandescent appliance light bulb with a small base screw-in that fits in a variety of appliances such as microwaves, refrigerators, freezers...
This is a microwave air filter that is located on the bottom side of an over-the-range appliance. No tools are needed for this repair, simply pull back on the tab to lift the existing filter out, and replace with new filter. This air filter is eight inches long, 5 inches tall, and is made entirely of metal. This is an OEM part that is sourced from the authentic manufacturer of the appliance. To preserve the life of your microwave air filter, occasionally take it out and wash it in a warm water and detergent solution.
In your microwave, the diode allows current to flow one-way only, converting alternating current to direct current. If you notice that your microwave does not heat properly, you may need to replace the diode. This product is approximately 3 inches in length. Before completing this repair, be sure to disconnect the power source from the microwave. The diode is located inside the main compartment of the microwave, so you will need to open it up before you can complete this repair. This is an OEM part sourced directly from the manufacturer. Many of our customers have rated this repair as easy.
This roller guide sits underneath the glass turntable tray.
This microwave turntable cooking tray is twelve inches in diameter, and is made of glass.
This part is a genuine manufacturer door interlock switch kit, also known as primary micro switch or microwave switch kit, for a microwave. The function of this part is to sense when the door of the microwave is open or closed. If the part is defective, the microwave will not start or will start when door is open. This kit contains two 15 Amp, 125/250 Volt switches with 3/16 inch terminals. Be sure to disconnect power to microwave before replacing part. Use extreme caution when replacing microwave parts, as high-voltage capacitors can retain an electrical charge when unplugged.
This rivet is used for the stirrer cover/wave guide. They are sold individually.
This motor rotates the glass turntable in the microwave.
This hardware kit is used to mount the microwave.
Under the counter mounting bracket.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.