Models
>
ML-42082
ML-42082 KitchenAid Dishwasher - Overview
Sections of the ML-42082
[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Door Catch Kit
PartSelect #: PS334230
Manufacturer #: 279570
This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, ...
$5.04
In Stock
Drip Bowl - 6 Inch
PartSelect #: PS2366565
Manufacturer #: W10196406RW
If your element will not heat, there could be an issue with your drip bowl. This chrome drip bowl is 8 inches in diameter, and fits most electric ranges. Before you replace the drip bowl, make sure th...
$10.10
In Stock
Rubber Water Delivery Tube
PartSelect #: PS356311
Manufacturer #: 4171544
This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will lead to poor cleanin...
No Longer Available
Door Seal with Mounting Clips
PartSelect #: PS354582
Manufacturer #: 4161631
This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.
No Longer Available
Front Panel Insert Kit - Stainless Steel
PartSelect #: PS355946
Manufacturer #: 4169400
This stainless steel front panel kit contains two pieces: the door panel and the kickplate panel.
No Longer Available
Float Stem Kit
PartSelect #: PS2338895
Manufacturer #: W10207863
This kit comes with the float stem, gasket and switch.
$40.59
In Stock
Dishwasher Float
PartSelect #: PS402262
Manufacturer #: 9743070
This dishwasher float is used for overfill protection.
***UPDATE: This part no longer comes with the cork seal on the shaft.
No Longer Available
Delta Frame Surface Unit - 8 Inch
PartSelect #: PS340503
Manufacturer #: 326789
This electric range delta frame surface element with looped terminal ends measures eight inches and has five turns. It carries 2600 watts the center medallion is black in color.
$91.53
In Stock
Delta Frame Canning Element - 8"
PartSelect #: PS333520
Manufacturer #: 242905
This canning element is typically used for Whirlpool/Kenmore brand electric ranges. This element has a 3/4 raised frame for additional support, 5 turns, and carries 2600 watts. It also comes with an infinite switch.
No Longer Available
Lower Wash Arm Support with Self Cleaning Filter
PartSelect #: PS355103
Manufacturer #: 4163370
This black lower wash arm support with self cleaning filter is seven inches in diameter.
No Longer Available
Double Burner Plug-In Module
PartSelect #: PS333519
Manufacturer #: 242903
This is an older style cartridge and has one 8" and one 6" surface element included.
No Longer Available
Questions And Answers for ML-42082
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the ML-42082
[Viewing 7 of 7]Door won’t close
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Door Pops Open
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door Catch part had fallen out,/ was missing
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.
Parts Used:
-
Terri from Saint Augustine, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
672 of 730 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door wouldn't latch.
I can't believe I waited so long to find this part and do this. I got the package very fast, opened it, took the piece to my dryer and popped it into place with my fingers. It worked perfectly! this took all of two minutes and saved me from having to hold the dryer door closed with a stick. Thank you, thank you!!!
Parts Used:
-
Melody from North Las Vegas, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
202 of 282 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer door would not stay shut
This repair was a cinch. Pliers to pull out the metal piece and a screwdriver to pry out the 'catch' part in the door. Both replacement pieces went right in. I cannot believe how easy and CHEAP this fix was, and I'm so glad I found this site!! I figured I would have to call a repairman and pay big bucks, so I put it off, but the door
... Read more
was getting worse--slamming it so hard to keep it shut. Again, thanks for this great site.
Read less
Parts Used:
-
Pam from Woodbridge, VA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
103 of 106 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!