This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
This drain pump for your washer is designed to remove the dirty water during and after the washing cycle. If your washer has water left in it after its washing cycle is over, or if your washer is expe...
This is a door hinge, which allows for your washer door to properly shut during the washing cycle, and open after it is finished. If your door hinge is bent or broken and not allowing the door to shut...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This is a door bellow, also known as a door seal gasket, made for various models of washing machine. This bellow is designed to seal the inner drum of the washer from the outside of the washing machin...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This is a dryer door hinge cap, also known as a bushing, which is a durable plastic cap that is installed on the door hinge and is used to allow your dryer door to operate smoothly when opening and cl...
The leveling leg locking nut is an OEM replacement fastener for use in dryers and washers. It has a head diameter of 3/8 inches and a thread pitch of 16 threads per inch. The nut secures the leveling ...
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside t...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This is a door lock designed by the OEM and made for washing machines. This door lock is used to hold, secure, and stop the washing machine door from opening during the washing cycle. If your washer i...
$100.60
In Stock
Questions And Answers for MHW3505FW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hubert
December 30, 2019
How many watts is this wash machine .Thank you.
For model number MHW3505FW1
Hello Hubert and thank you for writing.
This washing machine will use about 1100 watts. We hope this helps. Please contact us anytime if you require further assistance.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Theresa
February 17, 2020
How do I fix washer? Door locked light is lit and error codes f03, e01 with noise.
For model number MHW3505FW1
Hello Theresa, Thank you for the question. The F03 E01 indicates a fault with the Water Level Switch, PartSelect Number PS11754877 and it may need to be replaced. before replacing the switch we suggest checking the hose to the switch to make sure thee is no blockage or build up. We hope this helps.
Hi William, thank you for the question. Based on our understanding of the issue, we would suggest that you make sure the washer is level. If that is not causing the issue, then you may need to make sure that the load is balanced. The contents of the load may not end up evenly distributed when the spin cycle begins. The machine will stop if it is too unbalanced. Unbunch the blankets and spread them along the walls of the tub, and move the other items away from the blankets. If the issue persists, then you may need to check the stator assembly, part number PS11738087, as it might be faulty. We hope this is what you were looking for!
Hello Peggy, thank you for reaching out. According to our research, the Fl error code indicates that the washer is not detecting the correct amount of incoming water. We would recommend checking the water level switch, part number PS11754877, to fix the issue. We hope this helps!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a
... Read more year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping.
Turned washer on its side. Pulled the bottom plate off. Then unplugged the electrical lines. Then unbolted the drain pump and bolted the new drain pump in. Then reversed the process.