MH1170XSS0 Whirlpool Microwave - Instructions
Sections
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the MH1170XSS0
Hood light wont work
Turned power off. Removed all the screws from bottom removed socket and replaced
Parts Used:
Brandon from Vancouver, WA
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
9 of 22 people
found this instruction helpful.
Thank you for voting!
light bulb burned-out
screwed in new bulb
Parts Used:
Pablo from Burlingame, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
13 of 34 people
found this instruction helpful.
Thank you for voting!
glass turntable broke in half, ring turn needed replaced
I removed the broken tray and ring-turn and replaced it with the new Service was fantastic, parts were ordered one day and received the next
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 people
found this instruction helpful.
Thank you for voting!
Screw broke out.
Put into place, tightened the screws.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 7 people
found this instruction helpful.
Thank you for voting!
broken glass tray
Washed the glass tray and put in the microwave oven. Easy..
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 people
found this instruction helpful.
Thank you for voting!
Turntable coupling
Rep knew exactly what I needed when I described where the part should go on my microwave - price great - shipping great - installed in seconds. Thank you!
Parts Used:
Laura from Port St Lucie, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 5 people
found this instruction helpful.
Thank you for voting!
Burned out bulb
Husband replaced the bulb
Parts Used:
Theresa from OVERLAND PARK, KS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Supports were bad
Replaced the supports and rack.
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Microwave didn't have support ring when house was purchased.
Removed turntable Place support ring in track Place turntable on support ring. Easy, peasy!
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Burned out light in microwave
Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.
Parts Used:
DANNY from SAINT JOHNS, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
4 of 8 people
found this instruction helpful.
Thank you for voting!
I had broken the glass turn table.
I ordered another one and placed it inside the microwave. It works and fits perfectly. I received the order exactly as scheduled.
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Replaced the charcoal filter.
On top front of the microwave are two Philip's head screws holding the rail on. Remove these screws and the rail snap out the old filter (noting the dark side down) then snapping the new filter in. Replace rail. 10 to 15 minute task.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
2 of 3 people
found this instruction helpful.
Thank you for voting!
glass turn table cracked needed a new one
easy to replace, just the same as cleaning the turntable and placing back in the micorwave;
Parts Used:
sharon from LAS VEGAS, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 people
found this instruction helpful.
Thank you for voting!
Dropped the glass cooking tray and it broke in half
Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy! E. Robinson
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 people
found this instruction helpful.
Thank you for voting!
The display went out
First I removed the air deflector at the top of the microwave with two screws. Then I removed the single screw that held the control panel. After I removed the control panel I removed all the wires plugged into it, marking the ones with similar plugs so I put them back correctly. The next step was removing the 4 screws that held in the circuit boards and display. Then I reversed the entire process. It was a breeze and saved me hundreds of dollars over a professional repair.
Parts Used:
Scott from Washington, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
2 of 3 people
found this instruction helpful.
Thank you for voting!
All Instructions for the MH1170XSS0