Models > MH1150XMT0 > Instructions

MH1150XMT0 Whirlpool Microwave - Instructions

All installation instructions for MH1150XMT0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MH1150XMT0
166-180 of 180
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken handle (top of the handle actually broke off the screw)

  • Customer: Jennifer from Seymour TN
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
After taking the three screws out of the side of the door, I actually had to get help from my Dad who came over and was able to pry the top corner of the door out of the casing. I was afraid I was going to break the door. Once he got the door pried apart, I was able to replace the handle, clean the entire door and quickly snap it back into place and then replaced the screws.

The capacitor was melted in the microwave

  • Customer: Jocelyne from Fort Pierce FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with a fan.

Tabs broke off the old grille

  • Customer: Lynne from Raleigh NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed screws from microwave case. installed new grille. inserted screws into holes in case. Tightened screws to secure grille

Broke glass tray

  • Customer: Katherine from Cleveland TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Arrived in 24hours!!! Great.

Broken tabs on grill vent

  • Customer: Alice from St. Peters MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the old vent which had been taped in place, installed the new one, took less than five minutes to do the repair. Perfect fit. Also, I ordered the vent on Monday and it arrived on Tuesday. Fantastic!

vent plastic broken kept vent falling down on stove

  • Customer: Jesse from VICTORVILLE CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
remove old vent that was held in place by clips and two screws re-installed. Only problem is that should have ordered new clips was not aware that they did not come with the new vent

NONE

  • Customer: BRIAN from CLEARWATER FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
REMOVED THE TWO PHILIPS SCREWS INSTALLED NEW GRILL AND REPLACED THE SCREWS.

Needed to replace vent grille after breaking a little plastic ear that helped it stay in place.

  • Customer: Geneva from Waco TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Just be sure to push both sides of the grille into place and screws were easy to tighten. The filter is not difficult at all. Made me proud to repair it myself (73 yoa)

broken glass cooking tray for microwave

  • Customer: Vanessa from Atlanta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Twas really easy considering that all I had to do was place the plate back in the microwave. Easy Peasey

broken glass microwave tray

  • Customer: Ronald from Rhinelander WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Tray arrived in a short period of time and was a perfect match.

Vent Grille fell off when opening door on microwave

  • Customer: Kathleen from Bloomingdale IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed 2 screws that were holding broken plastic tabs. Lined up lower plastic tabs on new grille into slots, gently. Tipped forward to engage upper tabs into slots. You need to "gently" press the top into place to avoid breaking off the tabs! Replace 2 screws, and hand tighten with Phillips screwdriver. Easier to see what you're doing with the microwave door "open". I felt "accomplished" for a 70-year old Grandma.:)

Replace turntable motor

  • Customer: Monty from Mansfield TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed perimeter screws from the bottom side and the lower cover is hinged at the wall side. Motor is visible and easily removed with two screws. Take of the old one, install the new one, and reverse the procedure to put the bottom cover back in place. Will nee helper to hold one side of the bottom until couple of screws can be put in on the other side.

A stove burner left on below the microwave cooked the plastic of the Microwave door and handle causing it to deteriorate and fail.

  • Customer: James from Huber Heights OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
(1) Pulled the door open (2) removed three screws on the right side of the door edge. (3) Removed old outer door panel and glass. (4) Removed two screws holding old handle to old door panel. (5) Attached new door handle to new door panel with old screws. (6) Aligned left side of new door panel on the hinge side of door so that top and bottom hinge plates fit inside door panel. (7) Squeezed right side of door panel until inner door was completely covered by door panel. (8) Screwed three recovered screws into side of door panel into inner door. (9) Closed door and reopened it several times to test repair.

Critical grill pieces for attachment purposes broke when removing for cleaning

  • Customer: MARCY from CHARLOTTE NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Wedged grill into open space and screwed in with existing screws

Microwave Vent Hood Filters

  • Customer: Vicki from Phoenix AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Not so sure this would qualify as "instructions", but I only needed a screwdriver because the "D" rings of the old vent filters broke off and I had to pry to old ones out. Keep in mind, I am mechanically disadvantaged and can barely change an A/C filter ... that being said, all I did for this order was input my Model number and PartSelect found the correct replacement part. I receive the parts super quick (faster than the other 2 purchases I did that day). The only bummer was the packaging ... super huge box for small tiny parts. Otherwise, I now know where to go for replacement parts. This project should be a "no-brainer" for most DYI's, so getting the right parts with just a model number was lifesaving for me :0)
All Instructions for the MH1150XMT0
166-180 of 180