Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Grill was cracked (mounting tabs) some time ago by unknown source. Suggest during in warranty problem on fire hazard. Vent grill was falling off.
Unscrewed the remaining (2) screws that held the vent in place, placed the new grill in the tab loctators, and screwed it into place. Done...in less than 10 minutes. It took me 15 minutes to find my wife to show her what a nice job I did.
part of grill plastic became crystalized and cracked
First, the screws were removed that held the vent grill to take off grill. The new vent grill was then replaced in a very short time. No problems at all.
I removed the 2 screws holding the broken vent grill, placed the new one in place and put the 2 screws back in place. Took less than 5 minutes from opening package to replacing the grill.
Grille was not attached by previous contractor (they just leaned it in place) We were to clean up and ofcourse when it was touched to the floor it went.
Repair was very easy. We were more impressed with your selection and ordering process. Very quick as was needed for this job to be completed. Our customer was impressed that we found the part and that we were able to get it in so quickly. You helped us continue our professional service. Thank You
I removed the broken tabs with a screwdriver and snaped in the new cover replacing the screws once I had it in place. the entire job took less than 5 min.
All I had to do was open the microwave door and place the turntable on the designated grooves, wha lah it fit. I am now back in business. Thanks to partselect, I found my replacement, ordered and it was shipped in no time.
took old vent grill and tabs off using phillip screwdriver. started putting new grill on and it wouldnt go on. got to looking and there are two more screws that you have to loosen up so the grill will go into place these two screws are between the two tabs at each end. caution do not over tighten the screws it will break the tabs. overall easy to install.
The top vent grill tabs broke rendering it unusable
I simply removed the original 2 screws for the old grill, attached the new grill, fastened it with the original screws & It fit perfectly in less than 5 minutes time.
The vent grille became lose and was falling off from the position each time we open the microwave.
First, I ordered the part.The part was sent to me within 2 days.Then,I removed the old one that was always falling off and mounted the new one. It was a perfect fit.
I have been doing repair on things on my own for years, I am a retired prevenative maintenace supervisor. While cleaning the microwave vent grill from being old it fell apart, so I ordered the part using the internet to find the a company that has the same part, the part didnt take long before I recieved it. It didnt take five minutes to install it, and it saved me cash in the pocket from someone else to do the work. wallen
Removed the screws holding the broken tabs and thought the new vent grille would click right into place. I had quite a bit of trouble getting all the tabs lined up to click into place, but was finally able to do it. Then I just used the old screws to secure the new grille.